patch-2.4.25 linux-2.4.25/drivers/video/au1100fb.c

• Lines: 36
• Date: 2004-02-18 05:36:31.000000000 -0800
• Orig file: linux-2.4.24/drivers/video/au1100fb.c
• Orig date: 2003-08-25 04:44:42.000000000 -0700

diff -urN linux-2.4.24/drivers/video/au1100fb.c linux-2.4.25/drivers/video/au1100fb.c
@@ -61,7 +61,7 @@
  * Sanity check. If this is a new Au1100 based board, search for
  * the PB1100 ifdefs to make sure you modify the code accordingly.
  */
-#if defined(CONFIG_MIPS_PB1100) || defined(CONFIG_MIPS_DB1100)
+#if defined(CONFIG_MIPS_PB1100) || defined(CONFIG_MIPS_DB1100) || defined(CONFIG_MIPS_HYDROGEN3)
 #else
 error Unknown Au1100 board
 #endif
@@ -320,6 +320,12 @@
 		au_writew(au_readw(PB1100_G_CONTROL) | p_lcd->mode_backlight, 
 			PB1100_G_CONTROL);
 #endif
+#ifdef CONFIG_MIPS_HYDROGEN3
+		/*  Turn controller & power supply on,  GPIO213 */
+		au_writel(0x20002000, 0xB1700008);
+		au_writel(0x00040000, 0xB1900108);
+		au_writel(0x01000100, 0xB1700008);
+#endif
 		au_sync();
 		break;
 
@@ -479,6 +485,13 @@
 	au_writew(au_readw(PB1100_G_CONTROL) | p_lcd->mode_backlight, 
 			PB1100_G_CONTROL);
 #endif
+#ifdef CONFIG_MIPS_HYDROGEN3
+	/*  Turn controller & power supply on,  GPIO213 */
+	au_writel(0x20002000, 0xB1700008);
+	au_writel(0x00040000, 0xB1900108);
+	au_writel(0x01000100, 0xB1700008);
+#endif
+
 	p_lcd_reg->lcd_control |= LCD_CONTROL_GO;
 
 	return 0;