patch-2.4.3 linux/drivers/scsi/aic7xxx/aic7xxx_pci.c
Next file: linux/drivers/scsi/aic7xxx/aic7xxx_proc.c
Previous file: linux/drivers/scsi/aic7xxx/aic7xxx_osm.h
Back to the patch index
Back to the overall index
- Lines: 2138
- Date:
Sun Mar 4 14:30:18 2001
- Orig file:
v2.4.2/linux/drivers/scsi/aic7xxx/aic7xxx_pci.c
- Orig date:
Wed Dec 31 16:00:00 1969
diff -u --recursive --new-file v2.4.2/linux/drivers/scsi/aic7xxx/aic7xxx_pci.c linux/drivers/scsi/aic7xxx/aic7xxx_pci.c
@@ -0,0 +1,2137 @@
+/*
+ * Product specific probe and attach routines for:
+ * 3940, 2940, aic7895, aic7890, aic7880,
+ * aic7870, aic7860 and aic7850 SCSI controllers
+ *
+ * Copyright (c) 1995-2000 Justin T. Gibbs
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification, immediately at the beginning of the file.
+ * 2. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU Public License ("GPL").
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * $Id: //depot/src/aic7xxx/aic7xxx_pci.c#17 $
+ *
+ * $FreeBSD: src/sys/dev/aic7xxx/aic7xxx_pci.c,v 1.6 2000/11/10 20:13:41 gibbs Exp $
+ */
+
+#include "aic7xxx_osm.h"
+#include "aic7xxx_inline.h"
+#include "aic7xxx_93cx6.h"
+
+#define AHC_PCI_IOADDR PCIR_MAPS /* I/O Address */
+#define AHC_PCI_MEMADDR (PCIR_MAPS + 4) /* Mem I/O Address */
+
+static __inline uint64_t
+ahc_compose_id(u_int device, u_int vendor, u_int subdevice, u_int subvendor)
+{
+ uint64_t id;
+
+ id = subvendor
+ | (subdevice << 16)
+ | ((uint64_t)vendor << 32)
+ | ((uint64_t)device << 48);
+
+ return (id);
+}
+
+#define ID_ALL_MASK 0xFFFFFFFFFFFFFFFFull
+#define ID_DEV_VENDOR_MASK 0xFFFFFFFF00000000ull
+#define ID_9005_GENERIC_MASK 0xFFF0FFFF00000000ull
+#define ID_9005_SISL_MASK 0x000FFFFF00000000ull
+#define ID_9005_SISL_ID 0x0005900500000000ull
+#define ID_AIC7850 0x5078900400000000ull
+#define ID_AHA_2902_04_10_15_20_30C 0x5078900478509004ull
+#define ID_AIC7855 0x5578900400000000ull
+#define ID_AIC7859 0x3860900400000000ull
+#define ID_AHA_2930CU 0x3860900438699004ull
+#define ID_AIC7860 0x6078900400000000ull
+#define ID_AIC7860C 0x6078900478609004ull
+#define ID_AHA_1480A 0x6075900400000000ull
+#define ID_AHA_2940AU_0 0x6178900400000000ull
+#define ID_AHA_2940AU_1 0x6178900478619004ull
+#define ID_AHA_2940AU_CN 0x2178900478219004ull
+#define ID_AHA_2930C_VAR 0x6038900438689004ull
+
+#define ID_AIC7870 0x7078900400000000ull
+#define ID_AHA_2940 0x7178900400000000ull
+#define ID_AHA_3940 0x7278900400000000ull
+#define ID_AHA_398X 0x7378900400000000ull
+#define ID_AHA_2944 0x7478900400000000ull
+#define ID_AHA_3944 0x7578900400000000ull
+#define ID_AHA_4944 0x7678900400000000ull
+
+#define ID_AIC7880 0x8078900400000000ull
+#define ID_AIC7880_B 0x8078900478809004ull
+#define ID_AHA_2940U 0x8178900400000000ull
+#define ID_AHA_3940U 0x8278900400000000ull
+#define ID_AHA_2944U 0x8478900400000000ull
+#define ID_AHA_3944U 0x8578900400000000ull
+#define ID_AHA_398XU 0x8378900400000000ull
+#define ID_AHA_4944U 0x8678900400000000ull
+#define ID_AHA_2940UB 0x8178900478819004ull
+#define ID_AHA_2930U 0x8878900478889004ull
+#define ID_AHA_2940U_PRO 0x8778900478879004ull
+#define ID_AHA_2940U_CN 0x0078900478009004ull
+
+#define ID_AIC7895 0x7895900478959004ull
+#define ID_AIC7895_ARO 0x7890900478939004ull
+#define ID_AIC7895_ARO_MASK 0xFFF0FFFFFFFFFFFFull
+#define ID_AHA_2940U_DUAL 0x7895900478919004ull
+#define ID_AHA_3940AU 0x7895900478929004ull
+#define ID_AHA_3944AU 0x7895900478949004ull
+
+#define ID_AIC7890 0x001F9005000F9005ull
+#define ID_AIC7890_ARO 0x00139005000F9005ull
+#define ID_AAA_131U2 0x0013900500039005ull
+#define ID_AHA_2930U2 0x0011900501819005ull
+#define ID_AHA_2940U2B 0x00109005A1009005ull
+#define ID_AHA_2940U2_OEM 0x0010900521809005ull
+#define ID_AHA_2940U2 0x00109005A1809005ull
+#define ID_AHA_2950U2B 0x00109005E1009005ull
+
+#define ID_AIC7892 0x008F9005FFFF9005ull
+#define ID_AIC7892_ARO 0x00839005FFFF9005ull
+#define ID_AHA_29160 0x00809005E2A09005ull
+#define ID_AHA_29160_CPQ 0x00809005E2A00E11ull
+#define ID_AHA_29160N 0x0080900562A09005ull
+#define ID_AHA_29160C 0x0080900562209005ull
+#define ID_AHA_29160B 0x00809005E2209005ull
+#define ID_AHA_19160B 0x0081900562A19005ull
+
+#define ID_AIC7896 0x005F9005FFFF9005ull
+#define ID_AIC7896_ARO 0x00539005FFFF9005ull
+#define ID_AHA_3950U2B_0 0x00509005FFFF9005ull
+#define ID_AHA_3950U2B_1 0x00509005F5009005ull
+#define ID_AHA_3950U2D_0 0x00519005FFFF9005ull
+#define ID_AHA_3950U2D_1 0x00519005B5009005ull
+
+#define ID_AIC7899 0x00CF9005FFFF9005ull
+#define ID_AIC7899_ARO 0x00C39005FFFF9005ull
+#define ID_AHA_3960D 0x00C09005F6209005ull
+#define ID_AHA_3960D_CPQ 0x00C09005F6200E11ull
+
+#define ID_AIC7810 0x1078900400000000ull
+#define ID_AIC7815 0x7815900400000000ull
+
+#define DEVID_9005_TYPE(id) ((id) & 0xF)
+#define DEVID_9005_TYPE_HBA 0x0 /* Standard Card */
+#define DEVID_9005_TYPE_AAA 0x3 /* RAID Card */
+#define DEVID_9005_TYPE_SISL 0x5 /* Low Cost Card */
+#define DEVID_9005_TYPE_MB 0xF /* On Motherboard */
+
+#define DEVID_9005_MAXRATE(id) (((id) & 0x30) >> 4)
+#define DEVID_9005_MAXRATE_U160 0x0
+#define DEVID_9005_MAXRATE_ULTRA2 0x1
+#define DEVID_9005_MAXRATE_ULTRA 0x2
+#define DEVID_9005_MAXRATE_FAST 0x3
+
+#define DEVID_9005_MFUNC(id) (((id) & 0x40) >> 6)
+
+#define DEVID_9005_CLASS(id) (((id) & 0xFF00) >> 8)
+#define DEVID_9005_CLASS_SPI 0x0 /* Parallel SCSI */
+
+#define SUBID_9005_TYPE(id) ((id) & 0xF)
+#define SUBID_9005_TYPE_MB 0xF /* On Motherboard */
+#define SUBID_9005_TYPE_CARD 0x0 /* Standard Card */
+#define SUBID_9005_TYPE_LCCARD 0x1 /* Low Cost Card */
+#define SUBID_9005_TYPE_RAID 0x3 /* Combined with Raid */
+
+#define SUBID_9005_TYPE_KNOWN(id) \
+ ((((id) & 0xF) == SUBID_9005_TYPE_MB) \
+ || (((id) & 0xF) == SUBID_9005_TYPE_CARD) \
+ || (((id) & 0xF) == SUBID_9005_TYPE_LCCARD) \
+ || (((id) & 0xF) == SUBID_9005_TYPE_RAID))
+
+#define SUBID_9005_MAXRATE(id) (((id) & 0x30) >> 4)
+#define SUBID_9005_MAXRATE_ULTRA2 0x0
+#define SUBID_9005_MAXRATE_ULTRA 0x1
+#define SUBID_9005_MAXRATE_U160 0x2
+#define SUBID_9005_MAXRATE_RESERVED 0x3
+
+#define SUBID_9005_SEEPTYPE(id) \
+ ((SUBID_9005_TYPE(id) == SUBID_9005_TYPE_MB) \
+ ? ((id) & 0xC0) >> 6 \
+ : ((id) & 0x300) >> 8)
+#define SUBID_9005_SEEPTYPE_NONE 0x0
+#define SUBID_9005_SEEPTYPE_1K 0x1
+#define SUBID_9005_SEEPTYPE_2K_4K 0x2
+#define SUBID_9005_SEEPTYPE_RESERVED 0x3
+#define SUBID_9005_AUTOTERM(id) \
+ ((SUBID_9005_TYPE(id) == SUBID_9005_TYPE_MB) \
+ ? (((id) & 0x400) >> 10) == 0 \
+ : (((id) & 0x40) >> 6) == 0)
+
+#define SUBID_9005_NUMCHAN(id) \
+ ((SUBID_9005_TYPE(id) == SUBID_9005_TYPE_MB) \
+ ? ((id) & 0x300) >> 8 \
+ : ((id) & 0xC00) >> 10)
+
+#define SUBID_9005_LEGACYCONN(id) \
+ ((SUBID_9005_TYPE(id) == SUBID_9005_TYPE_MB) \
+ ? 0 \
+ : ((id) & 0x80) >> 7)
+
+#define SUBID_9005_MFUNCENB(id) \
+ ((SUBID_9005_TYPE(id) == SUBID_9005_TYPE_MB) \
+ ? ((id) & 0x800) >> 11 \
+ : ((id) & 0x1000) >> 12)
+/*
+ * Informational only. Should use chip register to be
+ * ceratian, but may be use in identification strings.
+ */
+#define SUBID_9005_CARD_SCSIWIDTH_MASK 0x2000
+#define SUBID_9005_CARD_PCIWIDTH_MASK 0x4000
+#define SUBID_9005_CARD_SEDIFF_MASK 0x8000
+
+static ahc_device_setup_t ahc_aic785X_setup;
+static ahc_device_setup_t ahc_aic7860_setup;
+static ahc_device_setup_t ahc_apa1480_setup;
+static ahc_device_setup_t ahc_aic7870_setup;
+static ahc_device_setup_t ahc_aha394X_setup;
+static ahc_device_setup_t ahc_aha494X_setup;
+static ahc_device_setup_t ahc_aha398X_setup;
+static ahc_device_setup_t ahc_aic7880_setup;
+static ahc_device_setup_t ahc_aha2940Pro_setup;
+static ahc_device_setup_t ahc_aha394XU_setup;
+static ahc_device_setup_t ahc_aha398XU_setup;
+static ahc_device_setup_t ahc_aic7890_setup;
+static ahc_device_setup_t ahc_aic7892_setup;
+static ahc_device_setup_t ahc_aic7895_setup;
+static ahc_device_setup_t ahc_aic7896_setup;
+static ahc_device_setup_t ahc_aic7899_setup;
+static ahc_device_setup_t ahc_aha29160C_setup;
+static ahc_device_setup_t ahc_raid_setup;
+static ahc_device_setup_t ahc_aha394XX_setup;
+static ahc_device_setup_t ahc_aha494XX_setup;
+static ahc_device_setup_t ahc_aha398XX_setup;
+
+struct ahc_pci_identity ahc_pci_ident_table [] =
+{
+ /* aic7850 based controllers */
+ {
+ ID_AHA_2902_04_10_15_20_30C,
+ ID_ALL_MASK,
+ "Adaptec 2902/04/10/15/20/30C SCSI adapter",
+ ahc_aic785X_setup
+ },
+ /* aic7860 based controllers */
+ {
+ ID_AHA_2930CU,
+ ID_ALL_MASK,
+ "Adaptec 2930CU SCSI adapter",
+ ahc_aic7860_setup
+ },
+ {
+ ID_AHA_1480A & ID_DEV_VENDOR_MASK,
+ ID_DEV_VENDOR_MASK,
+ "Adaptec 1480A Ultra SCSI adapter",
+ ahc_apa1480_setup
+ },
+ {
+ ID_AHA_2940AU_0 & ID_DEV_VENDOR_MASK,
+ ID_DEV_VENDOR_MASK,
+ "Adaptec 2940A Ultra SCSI adapter",
+ ahc_aic7860_setup
+ },
+ {
+ ID_AHA_2940AU_CN & ID_DEV_VENDOR_MASK,
+ ID_DEV_VENDOR_MASK,
+ "Adaptec 2940A/CN Ultra SCSI adapter",
+ ahc_aic7860_setup
+ },
+ {
+ ID_AHA_2930C_VAR & ID_DEV_VENDOR_MASK,
+ ID_DEV_VENDOR_MASK,
+ "Adaptec 2930C SCSI adapter (VAR)",
+ ahc_aic7860_setup
+ },
+ /* aic7870 based controllers */
+ {
+ ID_AHA_2940,
+ ID_ALL_MASK,
+ "Adaptec 2940 SCSI adapter",
+ ahc_aic7870_setup
+ },
+ {
+ ID_AHA_3940,
+ ID_ALL_MASK,
+ "Adaptec 3940 SCSI adapter",
+ ahc_aha394X_setup
+ },
+ {
+ ID_AHA_398X,
+ ID_ALL_MASK,
+ "Adaptec 398X SCSI RAID adapter",
+ ahc_aha398X_setup
+ },
+ {
+ ID_AHA_2944,
+ ID_ALL_MASK,
+ "Adaptec 2944 SCSI adapter",
+ ahc_aic7870_setup
+ },
+ {
+ ID_AHA_3944,
+ ID_ALL_MASK,
+ "Adaptec 3944 SCSI adapter",
+ ahc_aha394X_setup
+ },
+ {
+ ID_AHA_4944,
+ ID_ALL_MASK,
+ "Adaptec 4944 SCSI adapter",
+ ahc_aha494X_setup
+ },
+ /* aic7880 based controllers */
+ {
+ ID_AHA_2940U & ID_DEV_VENDOR_MASK,
+ ID_DEV_VENDOR_MASK,
+ "Adaptec 2940 Ultra SCSI adapter",
+ ahc_aic7880_setup
+ },
+ {
+ ID_AHA_3940U & ID_DEV_VENDOR_MASK,
+ ID_DEV_VENDOR_MASK,
+ "Adaptec 3940 Ultra SCSI adapter",
+ ahc_aha394XU_setup
+ },
+ {
+ ID_AHA_2944U & ID_DEV_VENDOR_MASK,
+ ID_DEV_VENDOR_MASK,
+ "Adaptec 2944 Ultra SCSI adapter",
+ ahc_aic7880_setup
+ },
+ {
+ ID_AHA_3944U & ID_DEV_VENDOR_MASK,
+ ID_DEV_VENDOR_MASK,
+ "Adaptec 3944 Ultra SCSI adapter",
+ ahc_aha394XU_setup
+ },
+ {
+ ID_AHA_398XU & ID_DEV_VENDOR_MASK,
+ ID_DEV_VENDOR_MASK,
+ "Adaptec 398X Ultra SCSI RAID adapter",
+ ahc_aha398XU_setup
+ },
+ {
+ /*
+ * XXX Don't know the slot numbers
+ * so we can't identify channels
+ */
+ ID_AHA_4944U & ID_DEV_VENDOR_MASK,
+ ID_DEV_VENDOR_MASK,
+ "Adaptec 4944 Ultra SCSI adapter",
+ ahc_aic7880_setup
+ },
+ {
+ ID_AHA_2930U & ID_DEV_VENDOR_MASK,
+ ID_DEV_VENDOR_MASK,
+ "Adaptec 2930 Ultra SCSI adapter",
+ ahc_aic7880_setup
+ },
+ {
+ ID_AHA_2940U_PRO & ID_DEV_VENDOR_MASK,
+ ID_DEV_VENDOR_MASK,
+ "Adaptec 2940 Pro Ultra SCSI adapter",
+ ahc_aha2940Pro_setup
+ },
+ {
+ ID_AHA_2940U_CN & ID_DEV_VENDOR_MASK,
+ ID_DEV_VENDOR_MASK,
+ "Adaptec 2940/CN Ultra SCSI adapter",
+ ahc_aic7880_setup
+ },
+ /* Ignore all SISL (AAC on MB) based controllers. */
+ {
+ ID_9005_SISL_ID,
+ ID_9005_SISL_MASK,
+ NULL,
+ NULL
+ },
+ /* aic7890 based controllers */
+ {
+ ID_AHA_2930U2,
+ ID_ALL_MASK,
+ "Adaptec 2930 Ultra2 SCSI adapter",
+ ahc_aic7890_setup
+ },
+ {
+ ID_AHA_2940U2B,
+ ID_ALL_MASK,
+ "Adaptec 2940B Ultra2 SCSI adapter",
+ ahc_aic7890_setup
+ },
+ {
+ ID_AHA_2940U2_OEM,
+ ID_ALL_MASK,
+ "Adaptec 2940 Ultra2 SCSI adapter (OEM)",
+ ahc_aic7890_setup
+ },
+ {
+ ID_AHA_2940U2,
+ ID_ALL_MASK,
+ "Adaptec 2940 Ultra2 SCSI adapter",
+ ahc_aic7890_setup
+ },
+ {
+ ID_AHA_2950U2B,
+ ID_ALL_MASK,
+ "Adaptec 2950 Ultra2 SCSI adapter",
+ ahc_aic7890_setup
+ },
+ {
+ ID_AIC7890_ARO,
+ ID_ALL_MASK,
+ "Adaptec aic7890/91 Ultra2 SCSI adapter (ARO)",
+ ahc_aic7890_setup
+ },
+ {
+ ID_AAA_131U2,
+ ID_ALL_MASK,
+ "Adaptec AAA-131 Ultra2 RAID adapter",
+ ahc_aic7890_setup
+ },
+ /* aic7892 based controllers */
+ {
+ ID_AHA_29160,
+ ID_ALL_MASK,
+ "Adaptec 29160 Ultra160 SCSI adapter",
+ ahc_aic7892_setup
+ },
+ {
+ ID_AHA_29160_CPQ,
+ ID_ALL_MASK,
+ "Adaptec (Compaq OEM) 29160 Ultra160 SCSI adapter",
+ ahc_aic7892_setup
+ },
+ {
+ ID_AHA_29160N,
+ ID_ALL_MASK,
+ "Adaptec 29160N Ultra160 SCSI adapter",
+ ahc_aic7892_setup
+ },
+ {
+ ID_AHA_29160C,
+ ID_ALL_MASK,
+ "Adaptec 29160C Ultra160 SCSI adapter",
+ ahc_aha29160C_setup
+ },
+ {
+ ID_AHA_29160B,
+ ID_ALL_MASK,
+ "Adaptec 29160B Ultra160 SCSI adapter",
+ ahc_aic7892_setup
+ },
+ {
+ ID_AHA_19160B,
+ ID_ALL_MASK,
+ "Adaptec 19160B Ultra160 SCSI adapter",
+ ahc_aic7892_setup
+ },
+ {
+ ID_AIC7892_ARO,
+ ID_ALL_MASK,
+ "Adaptec aic7892 Ultra2 SCSI adapter (ARO)",
+ ahc_aic7892_setup
+ },
+ /* aic7895 based controllers */
+ {
+ ID_AHA_2940U_DUAL,
+ ID_ALL_MASK,
+ "Adaptec 2940/DUAL Ultra SCSI adapter",
+ ahc_aic7895_setup
+ },
+ {
+ ID_AHA_3940AU,
+ ID_ALL_MASK,
+ "Adaptec 3940A Ultra SCSI adapter",
+ ahc_aic7895_setup
+ },
+ {
+ ID_AHA_3944AU,
+ ID_ALL_MASK,
+ "Adaptec 3944A Ultra SCSI adapter",
+ ahc_aic7895_setup
+ },
+ {
+ ID_AIC7895_ARO,
+ ID_AIC7895_ARO_MASK,
+ "Adaptec aic7895 Ultra SCSI adapter (ARO)",
+ ahc_aic7895_setup
+ },
+ /* aic7896/97 based controllers */
+ {
+ ID_AHA_3950U2B_0,
+ ID_ALL_MASK,
+ "Adaptec 3950B Ultra2 SCSI adapter",
+ ahc_aic7896_setup
+ },
+ {
+ ID_AHA_3950U2B_1,
+ ID_ALL_MASK,
+ "Adaptec 3950B Ultra2 SCSI adapter",
+ ahc_aic7896_setup
+ },
+ {
+ ID_AHA_3950U2D_0,
+ ID_ALL_MASK,
+ "Adaptec 3950D Ultra2 SCSI adapter",
+ ahc_aic7896_setup
+ },
+ {
+ ID_AHA_3950U2D_1,
+ ID_ALL_MASK,
+ "Adaptec 3950D Ultra2 SCSI adapter",
+ ahc_aic7896_setup
+ },
+ {
+ ID_AIC7896_ARO,
+ ID_ALL_MASK,
+ "Adaptec aic7896/97 Ultra2 SCSI adapter (ARO)",
+ ahc_aic7896_setup
+ },
+ /* aic7899 based controllers */
+ {
+ ID_AHA_3960D,
+ ID_ALL_MASK,
+ "Adaptec 3960D Ultra160 SCSI adapter",
+ ahc_aic7899_setup
+ },
+ {
+ ID_AHA_3960D_CPQ,
+ ID_ALL_MASK,
+ "Adaptec (Compaq OEM) 3960D Ultra160 SCSI adapter",
+ ahc_aic7899_setup
+ },
+ {
+ ID_AIC7899_ARO,
+ ID_ALL_MASK,
+ "Adaptec aic7899 Ultra160 SCSI adapter (ARO)",
+ ahc_aic7899_setup
+ },
+ /* Generic chip probes for devices we don't know 'exactly' */
+ {
+ ID_AIC7850 & ID_DEV_VENDOR_MASK,
+ ID_DEV_VENDOR_MASK,
+ "Adaptec aic7850 SCSI adapter",
+ ahc_aic785X_setup
+ },
+ {
+ ID_AIC7855 & ID_DEV_VENDOR_MASK,
+ ID_DEV_VENDOR_MASK,
+ "Adaptec aic7855 SCSI adapter",
+ ahc_aic785X_setup
+ },
+ {
+ ID_AIC7859 & ID_DEV_VENDOR_MASK,
+ ID_DEV_VENDOR_MASK,
+ "Adaptec aic7859 Ultra SCSI adapter",
+ ahc_aic7860_setup
+ },
+ {
+ ID_AIC7860 & ID_DEV_VENDOR_MASK,
+ ID_DEV_VENDOR_MASK,
+ "Adaptec aic7860 SCSI adapter",
+ ahc_aic7860_setup
+ },
+ {
+ ID_AIC7870 & ID_DEV_VENDOR_MASK,
+ ID_DEV_VENDOR_MASK,
+ "Adaptec aic7870 SCSI adapter",
+ ahc_aic7870_setup
+ },
+ {
+ ID_AIC7880 & ID_DEV_VENDOR_MASK,
+ ID_DEV_VENDOR_MASK,
+ "Adaptec aic7880 Ultra SCSI adapter",
+ ahc_aic7880_setup
+ },
+ {
+ ID_AIC7890 & ID_9005_GENERIC_MASK,
+ ID_9005_GENERIC_MASK,
+ "Adaptec aic7890/91 Ultra2 SCSI adapter",
+ ahc_aic7890_setup
+ },
+ {
+ ID_AIC7892 & ID_9005_GENERIC_MASK,
+ ID_9005_GENERIC_MASK,
+ "Adaptec aic7892 Ultra160 SCSI adapter",
+ ahc_aic7892_setup
+ },
+ {
+ ID_AIC7895 & ID_DEV_VENDOR_MASK,
+ ID_DEV_VENDOR_MASK,
+ "Adaptec aic7895 Ultra SCSI adapter",
+ ahc_aic7895_setup
+ },
+ {
+ ID_AIC7896 & ID_9005_GENERIC_MASK,
+ ID_9005_GENERIC_MASK,
+ "Adaptec aic7896/97 Ultra2 SCSI adapter",
+ ahc_aic7896_setup
+ },
+ {
+ ID_AIC7899 & ID_9005_GENERIC_MASK,
+ ID_9005_GENERIC_MASK,
+ "Adaptec aic7899 Ultra160 SCSI adapter",
+ ahc_aic7899_setup
+ },
+ {
+ ID_AIC7810 & ID_DEV_VENDOR_MASK,
+ ID_DEV_VENDOR_MASK,
+ "Adaptec aic7810 RAID memory controller",
+ ahc_raid_setup
+ },
+ {
+ ID_AIC7815 & ID_DEV_VENDOR_MASK,
+ ID_DEV_VENDOR_MASK,
+ "Adaptec aic7815 RAID memory controller",
+ ahc_raid_setup
+ }
+};
+
+const u_int ahc_num_pci_devs = NUM_ELEMENTS(ahc_pci_ident_table);
+
+#define AHC_394X_SLOT_CHANNEL_A 4
+#define AHC_394X_SLOT_CHANNEL_B 5
+
+#define AHC_398X_SLOT_CHANNEL_A 4
+#define AHC_398X_SLOT_CHANNEL_B 8
+#define AHC_398X_SLOT_CHANNEL_C 12
+
+#define AHC_494X_SLOT_CHANNEL_A 4
+#define AHC_494X_SLOT_CHANNEL_B 5
+#define AHC_494X_SLOT_CHANNEL_C 6
+#define AHC_494X_SLOT_CHANNEL_D 7
+
+#define DEVCONFIG 0x40
+#define SCBSIZE32 0x00010000ul /* aic789X only */
+#define REXTVALID 0x00001000ul /* ultra cards only */
+#define MPORTMODE 0x00000400ul /* aic7870 only */
+#define RAMPSM 0x00000200ul /* aic7870 only */
+#define VOLSENSE 0x00000100ul
+#define SCBRAMSEL 0x00000080ul
+#define MRDCEN 0x00000040ul
+#define EXTSCBTIME 0x00000020ul /* aic7870 only */
+#define EXTSCBPEN 0x00000010ul /* aic7870 only */
+#define BERREN 0x00000008ul
+#define DACEN 0x00000004ul
+#define STPWLEVEL 0x00000002ul
+#define DIFACTNEGEN 0x00000001ul /* aic7870 only */
+
+#define CSIZE_LATTIME 0x0c
+#define CACHESIZE 0x0000003ful /* only 5 bits */
+#define LATTIME 0x0000ff00ul
+
+typedef enum
+{
+ AHC_POWER_STATE_D0,
+ AHC_POWER_STATE_D1,
+ AHC_POWER_STATE_D2,
+ AHC_POWER_STATE_D3
+} ahc_power_state;
+
+static void ahc_power_state_change(struct ahc_softc *ahc,
+ ahc_power_state new_state);
+static int ahc_ext_scbram_present(struct ahc_softc *ahc);
+static void ahc_scbram_config(struct ahc_softc *ahc, int enable,
+ int pcheck, int fast, int large);
+static void ahc_probe_ext_scbram(struct ahc_softc *ahc);
+static void check_extport(struct ahc_softc *ahc, u_int *sxfrctl1);
+static void configure_termination(struct ahc_softc *ahc,
+ struct seeprom_descriptor *sd,
+ u_int adapter_control,
+ u_int *sxfrctl1);
+
+static void ahc_new_term_detect(struct ahc_softc *ahc,
+ int *enableSEC_low,
+ int *enableSEC_high,
+ int *enablePRI_low,
+ int *enablePRI_high,
+ int *eeprom_present);
+static void aic787X_cable_detect(struct ahc_softc *ahc, int *internal50_present,
+ int *internal68_present,
+ int *externalcable_present,
+ int *eeprom_present);
+static void aic785X_cable_detect(struct ahc_softc *ahc, int *internal50_present,
+ int *externalcable_present,
+ int *eeprom_present);
+static int acquire_seeprom(struct ahc_softc *ahc,
+ struct seeprom_descriptor *sd);
+static void release_seeprom(struct seeprom_descriptor *sd);
+static void write_brdctl(struct ahc_softc *ahc, uint8_t value);
+static uint8_t read_brdctl(struct ahc_softc *ahc);
+
+struct ahc_pci_identity *
+ahc_find_pci_device(ahc_dev_softc_t pci)
+{
+ uint64_t full_id;
+ uint16_t device;
+ uint16_t vendor;
+ uint16_t subdevice;
+ uint16_t subvendor;
+ struct ahc_pci_identity *entry;
+ u_int i;
+
+ vendor = ahc_pci_read_config(pci, PCIR_DEVVENDOR, /*bytes*/2);
+ device = ahc_pci_read_config(pci, PCIR_DEVICE, /*bytes*/2);
+ subvendor = ahc_pci_read_config(pci, PCIR_SUBVEND_0, /*bytes*/2);
+ subdevice = ahc_pci_read_config(pci, PCIR_SUBDEV_0, /*bytes*/2);
+ full_id = ahc_compose_id(device,
+ vendor,
+ subdevice,
+ subvendor);
+
+ /* If the second function is not hooked up, ignore it. */
+ if (ahc_get_pci_function(pci) > 0
+ && subvendor == 0x9005
+ && SUBID_9005_TYPE_KNOWN(subdevice) != 0
+ && SUBID_9005_MFUNCENB(subdevice) == 0)
+ return (NULL);
+
+ for (i = 0; i < ahc_num_pci_devs; i++) {
+ entry = &ahc_pci_ident_table[i];
+ if (entry->full_id == (full_id & entry->id_mask)) {
+ /* Honor exclusion entries. */
+ if (entry->name == NULL)
+ return (NULL);
+ return (entry);
+ }
+ }
+ return (NULL);
+}
+
+int
+ahc_pci_config(struct ahc_softc *ahc, struct ahc_pci_identity *entry)
+{
+ struct ahc_probe_config probe_config;
+ struct scb_data *shared_scb_data;
+ u_int command;
+ u_int our_id = 0;
+ u_int sxfrctl1;
+ u_int scsiseq;
+ u_int dscommand0;
+ int error;
+ uint8_t sblkctl;
+
+ shared_scb_data = NULL;
+ ahc_init_probe_config(&probe_config);
+ error = entry->setup(ahc->dev_softc, &probe_config);
+ if (error != 0)
+ return (error);
+ probe_config.chip |= AHC_PCI;
+ probe_config.description = entry->name;
+
+ error = ahc_pci_map_registers(ahc);
+ if (error != 0)
+ return (error);
+
+ ahc_power_state_change(ahc, AHC_POWER_STATE_D0);
+
+ /* Ensure busmastering is enabled */
+ command = ahc_pci_read_config(ahc->dev_softc, PCIR_COMMAND, /*bytes*/1);
+ command |= PCIM_CMD_BUSMASTEREN;
+ ahc_pci_write_config(ahc->dev_softc, PCIR_COMMAND, command, /*bytes*/1);
+
+ /* On all PCI adapters, we allow SCB paging */
+ probe_config.flags |= AHC_PAGESCBS;
+
+ error = ahc_softc_init(ahc, &probe_config);
+ if (error != 0)
+ return (error);
+
+ /* Remeber how the card was setup in case there is no SEEPROM */
+ if ((ahc_inb(ahc, HCNTRL) & POWRDN) == 0) {
+ pause_sequencer(ahc);
+ if ((ahc->features & AHC_ULTRA2) != 0)
+ our_id = ahc_inb(ahc, SCSIID_ULTRA2) & OID;
+ else
+ our_id = ahc_inb(ahc, SCSIID) & OID;
+ sxfrctl1 = ahc_inb(ahc, SXFRCTL1) & STPWEN;
+ scsiseq = ahc_inb(ahc, SCSISEQ);
+ } else {
+ sxfrctl1 = STPWEN;
+ our_id = 7;
+ scsiseq = 0;
+ }
+
+ error = ahc_reset(ahc);
+ if (error != 0)
+ return (ENXIO);
+
+ if ((ahc->features & AHC_DT) != 0) {
+ u_int sfunct;
+
+ /* Perform ALT-Mode Setup */
+ sfunct = ahc_inb(ahc, SFUNCT) & ~ALT_MODE;
+ ahc_outb(ahc, SFUNCT, sfunct | ALT_MODE);
+ ahc_outb(ahc, OPTIONMODE, OPTIONMODE_DEFAULTS);
+ ahc_outb(ahc, SFUNCT, sfunct);
+
+ /* Normal mode setup */
+ ahc_outb(ahc, CRCCONTROL1, CRCVALCHKEN|CRCENDCHKEN|CRCREQCHKEN
+ |TARGCRCENDEN);
+ }
+
+ error = ahc_pci_map_int(ahc);
+ if (error != 0)
+ return (error);
+ dscommand0 = ahc_inb(ahc, DSCOMMAND0);
+ dscommand0 |= MPARCKEN|CACHETHEN;
+ if ((ahc->features & AHC_ULTRA2) != 0) {
+
+ /*
+ * DPARCKEN doesn't work correctly on
+ * some MBs so don't use it.
+ */
+ dscommand0 &= ~DPARCKEN;
+ }
+
+ /*
+ * Handle chips that must have cache line
+ * streaming (dis/en)abled.
+ */
+ if ((ahc->bugs & AHC_CACHETHEN_DIS_BUG) != 0)
+ dscommand0 |= CACHETHEN;
+
+ if ((ahc->bugs & AHC_CACHETHEN_BUG) != 0)
+ dscommand0 &= ~CACHETHEN;
+
+ ahc_outb(ahc, DSCOMMAND0, dscommand0);
+
+ ahc->pci_cachesize =
+ ahc_pci_read_config(ahc->dev_softc, CSIZE_LATTIME,
+ /*bytes*/1) & CACHESIZE;
+ ahc->pci_cachesize *= 4;
+
+ /* See if we have a SEEPROM and perform auto-term */
+ check_extport(ahc, &sxfrctl1);
+
+ /*
+ * Take the LED out of diagnostic mode
+ */
+ sblkctl = ahc_inb(ahc, SBLKCTL);
+ ahc_outb(ahc, SBLKCTL, (sblkctl & ~(DIAGLEDEN|DIAGLEDON)));
+
+ if ((ahc->features & AHC_ULTRA2) != 0) {
+ ahc_outb(ahc, DFF_THRSH, RD_DFTHRSH_MAX|WR_DFTHRSH_MAX);
+ } else {
+ ahc_outb(ahc, DSPCISTATUS, DFTHRSH_100);
+ }
+
+ if (ahc->flags & AHC_USEDEFAULTS) {
+ /*
+ * PCI Adapter default setup
+ * Should only be used if the adapter does not have
+ * a SEEPROM.
+ */
+ /* See if someone else set us up already */
+ if (scsiseq != 0) {
+ printf("%s: Using left over BIOS settings\n",
+ ahc_name(ahc));
+ ahc->flags &= ~AHC_USEDEFAULTS;
+ ahc->flags |= AHC_BIOS_ENABLED;
+ } else {
+ /*
+ * Assume only one connector and always turn
+ * on termination.
+ */
+ our_id = 0x07;
+ sxfrctl1 = STPWEN;
+ }
+ ahc_outb(ahc, SCSICONF, our_id|ENSPCHK|RESET_SCSI);
+
+ ahc->our_id = our_id;
+ }
+
+ /*
+ * Take a look to see if we have external SRAM.
+ * We currently do not attempt to use SRAM that is
+ * shared among multiple controllers.
+ */
+ ahc_probe_ext_scbram(ahc);
+
+ /*
+ * Record our termination setting for the
+ * generic initialization routine.
+ */
+ if ((sxfrctl1 & STPWEN) != 0)
+ ahc->flags |= AHC_TERM_ENB_A;
+
+ /*
+ * We cannot perform ULTRA speeds without
+ * the presense of the external precision
+ * resistor.
+ */
+ if ((ahc->features & AHC_ULTRA) != 0) {
+ uint32_t devconfig;
+
+ devconfig = ahc_pci_read_config(ahc->dev_softc,
+ DEVCONFIG, /*bytes*/4);
+ if ((devconfig & REXTVALID) == 0)
+ ahc->flags |= AHC_ULTRA_DISABLED;
+ }
+
+ /* Core initialization */
+ error = ahc_init(ahc);
+ if (error != 0)
+ return (error);
+
+ /*
+ * Link this softc in with all other ahc instances.
+ */
+ ahc_softc_insert(ahc);
+
+ return (0);
+}
+
+static void
+ahc_power_state_change(struct ahc_softc *ahc, ahc_power_state new_state)
+{
+ uint32_t cap;
+ u_int cap_offset;
+
+ /*
+ * Traverse the capability list looking for
+ * the power management capability.
+ */
+ cap = 0;
+ cap_offset = ahc_pci_read_config(ahc->dev_softc,
+ PCIR_CAP_PTR, /*bytes*/1);
+ while (cap_offset != 0) {
+
+ cap = ahc_pci_read_config(ahc->dev_softc,
+ cap_offset, /*bytes*/4);
+ if ((cap & 0xFF) == 1
+ && ((cap >> 16) & 0x3) > 0) {
+ uint32_t pm_control;
+
+ pm_control = ahc_pci_read_config(ahc->dev_softc,
+ cap_offset + 4,
+ /*bytes*/4);
+ pm_control &= ~0x3;
+ pm_control |= new_state;
+ ahc_pci_write_config(ahc->dev_softc,
+ cap_offset + 4,
+ pm_control, /*bytes*/2);
+ break;
+ }
+ cap_offset = (cap >> 8) & 0xFF;
+ }
+}
+
+/*
+ * Test for the presense of external sram in an
+ * "unshared" configuration.
+ */
+static int
+ahc_ext_scbram_present(struct ahc_softc *ahc)
+{
+ u_int chip;
+ int ramps;
+ int single_user;
+ uint32_t devconfig;
+
+ chip = ahc->chip & AHC_CHIPID_MASK;
+ devconfig = ahc_pci_read_config(ahc->dev_softc,
+ DEVCONFIG, /*bytes*/4);
+ single_user = (devconfig & MPORTMODE) != 0;
+
+ if ((ahc->features & AHC_ULTRA2) != 0)
+ ramps = (ahc_inb(ahc, DSCOMMAND0) & RAMPS) != 0;
+ else if (chip >= AHC_AIC7870)
+ ramps = (devconfig & RAMPSM) != 0;
+ else
+ ramps = 0;
+
+ if (ramps && single_user)
+ return (1);
+ return (0);
+}
+
+/*
+ * Enable external scbram.
+ */
+static void
+ahc_scbram_config(struct ahc_softc *ahc, int enable, int pcheck,
+ int fast, int large)
+{
+ uint32_t devconfig;
+
+ if (ahc->features & AHC_MULTI_FUNC) {
+ /*
+ * Set the SCB Base addr (highest address bit)
+ * depending on which channel we are.
+ */
+ ahc_outb(ahc, SCBBADDR, ahc_get_pci_function(ahc->dev_softc));
+ }
+
+ devconfig = ahc_pci_read_config(ahc->dev_softc, DEVCONFIG, /*bytes*/4);
+ if ((ahc->features & AHC_ULTRA2) != 0) {
+ u_int dscommand0;
+
+ dscommand0 = ahc_inb(ahc, DSCOMMAND0);
+ if (enable)
+ dscommand0 &= ~INTSCBRAMSEL;
+ else
+ dscommand0 |= INTSCBRAMSEL;
+ if (large)
+ dscommand0 &= ~USCBSIZE32;
+ else
+ dscommand0 |= USCBSIZE32;
+ ahc_outb(ahc, DSCOMMAND0, dscommand0);
+ } else {
+ if (fast)
+ devconfig &= ~EXTSCBTIME;
+ else
+ devconfig |= EXTSCBTIME;
+ if (enable)
+ devconfig &= ~SCBRAMSEL;
+ else
+ devconfig |= SCBRAMSEL;
+ if (large)
+ devconfig &= ~SCBSIZE32;
+ else
+ devconfig |= SCBSIZE32;
+ }
+ if (pcheck)
+ devconfig |= EXTSCBPEN;
+ else
+ devconfig &= ~EXTSCBPEN;
+
+ ahc_pci_write_config(ahc->dev_softc, DEVCONFIG, devconfig, /*bytes*/4);
+}
+
+/*
+ * Take a look to see if we have external SRAM.
+ * We currently do not attempt to use SRAM that is
+ * shared among multiple controllers.
+ */
+static void
+ahc_probe_ext_scbram(struct ahc_softc *ahc)
+{
+ int num_scbs;
+ int test_num_scbs;
+ int enable;
+ int pcheck;
+ int fast;
+ int large;
+
+ enable = FALSE;
+ pcheck = FALSE;
+ fast = FALSE;
+ large = FALSE;
+ num_scbs = 0;
+
+ if (ahc_ext_scbram_present(ahc) == 0)
+ goto done;
+
+ /*
+ * Probe for the best parameters to use.
+ */
+ ahc_scbram_config(ahc, /*enable*/TRUE, pcheck, fast, large);
+ num_scbs = ahc_probe_scbs(ahc);
+ if (num_scbs == 0) {
+ /* The SRAM wasn't really present. */
+ goto done;
+ }
+ enable = TRUE;
+
+ /*
+ * Clear any outstanding parity error
+ * and ensure that parity error reporting
+ * is enabled.
+ */
+ ahc_outb(ahc, SEQCTL, 0);
+ ahc_outb(ahc, CLRINT, CLRPARERR);
+ ahc_outb(ahc, CLRINT, CLRBRKADRINT);
+
+ /* Now see if we can do parity */
+ ahc_scbram_config(ahc, enable, /*pcheck*/TRUE, fast, large);
+ num_scbs = ahc_probe_scbs(ahc);
+ if ((ahc_inb(ahc, INTSTAT) & BRKADRINT) == 0
+ || (ahc_inb(ahc, ERROR) & MPARERR) == 0)
+ pcheck = TRUE;
+
+ /* Clear any resulting parity error */
+ ahc_outb(ahc, CLRINT, CLRPARERR);
+ ahc_outb(ahc, CLRINT, CLRBRKADRINT);
+
+ /* Now see if we can do fast timing */
+ ahc_scbram_config(ahc, enable, pcheck, /*fast*/TRUE, large);
+ test_num_scbs = ahc_probe_scbs(ahc);
+ if (test_num_scbs == num_scbs
+ && ((ahc_inb(ahc, INTSTAT) & BRKADRINT) == 0
+ || (ahc_inb(ahc, ERROR) & MPARERR) == 0))
+ fast = TRUE;
+
+ /*
+ * See if we can use large SCBs and still maintain
+ * the same overall count of SCBs.
+ */
+ if ((ahc->features & AHC_LARGE_SCBS) != 0) {
+ ahc_scbram_config(ahc, enable, pcheck, fast, /*large*/TRUE);
+ test_num_scbs = ahc_probe_scbs(ahc);
+ if (test_num_scbs >= num_scbs) {
+ large = TRUE;
+ num_scbs = test_num_scbs;
+ if (num_scbs >= 64) {
+ /*
+ * We have enough space to move the
+ * "busy targets table" into SCB space
+ * and make it qualify all the way to the
+ * lun level.
+ */
+ ahc->flags |= AHC_SCB_BTT;
+ }
+ }
+ }
+done:
+ /*
+ * Disable parity error reporting until we
+ * can load instruction ram.
+ */
+ ahc_outb(ahc, SEQCTL, PERRORDIS|FAILDIS);
+ /* Clear any latched parity error */
+ ahc_outb(ahc, CLRINT, CLRPARERR);
+ ahc_outb(ahc, CLRINT, CLRBRKADRINT);
+ if (bootverbose && enable) {
+ printf("%s: External SRAM, %s access%s, %dbytes/SCB\n",
+ ahc_name(ahc), fast ? "fast" : "slow",
+ pcheck ? ", parity checking enabled" : "",
+ large ? 64 : 32);
+ }
+ ahc_scbram_config(ahc, enable, pcheck, fast, large);
+}
+
+/*
+ * Check the external port logic for a serial eeprom
+ * and termination/cable detection contrls.
+ */
+static void
+check_extport(struct ahc_softc *ahc, u_int *sxfrctl1)
+{
+ struct seeprom_descriptor sd;
+ struct seeprom_config sc;
+ u_int scsi_conf;
+ u_int adapter_control;
+ int have_seeprom;
+ int have_autoterm;
+
+ sd.sd_ahc = ahc;
+ sd.sd_control_offset = SEECTL;
+ sd.sd_status_offset = SEECTL;
+ sd.sd_dataout_offset = SEECTL;
+
+ /*
+ * For some multi-channel devices, the c46 is simply too
+ * small to work. For the other controller types, we can
+ * get our information from either SEEPROM type. Set the
+ * type to start our probe with accordingly.
+ */
+ if (ahc->flags & AHC_LARGE_SEEPROM)
+ sd.sd_chip = C56_66;
+ else
+ sd.sd_chip = C46;
+
+ sd.sd_MS = SEEMS;
+ sd.sd_RDY = SEERDY;
+ sd.sd_CS = SEECS;
+ sd.sd_CK = SEECK;
+ sd.sd_DO = SEEDO;
+ sd.sd_DI = SEEDI;
+
+ have_seeprom = acquire_seeprom(ahc, &sd);
+ if (have_seeprom) {
+
+ if (bootverbose)
+ printf("%s: Reading SEEPROM...", ahc_name(ahc));
+
+ for (;;) {
+ u_int start_addr;
+
+ start_addr = 32 * (ahc->channel - 'A');
+
+ have_seeprom = read_seeprom(&sd, (uint16_t *)&sc,
+ start_addr, sizeof(sc)/2);
+
+ if (have_seeprom)
+ have_seeprom = verify_cksum(&sc);
+
+ if (have_seeprom != 0 || sd.sd_chip == C56_66) {
+ if (bootverbose) {
+ if (have_seeprom == 0)
+ printf ("checksum error\n");
+ else
+ printf ("done.\n");
+ }
+ break;
+ }
+ sd.sd_chip = C56_66;
+ }
+ }
+
+#if 0
+ if (!have_seeprom) {
+ /*
+ * Pull scratch ram settings and treat them as
+ * if they are the contents of an seeprom if
+ * the 'ADPT' signature is found in SCB2.
+ */
+ ahc_outb(ahc, SCBPTR, 2);
+ if (ahc_inb(ahc, SCB_BASE) == 'A'
+ && ahc_inb(ahc, SCB_BASE + 1) == 'D'
+ && ahc_inb(ahc, SCB_BASE + 2) == 'P'
+ && ahc_inb(ahc, SCB_BASE + 3) == 'T') {
+ uint8_t *sc_bytes;
+ int i;
+
+ sc_bytes = (uint8_t *)≻
+ for (i = 0; i < 64; i++)
+ sc_bytes[i] = ahc_inb(ahc, TARG_SCSIRATE + i);
+ /* Byte 0x1c is stored in byte 4 of SCB2 */
+ sc_bytes[0x1c] = ahc_inb(ahc, SCB_BASE + 4);
+ have_seeprom = verify_cksum(&sc);
+ }
+ }
+#endif
+
+ if (!have_seeprom) {
+ if (bootverbose)
+ printf("%s: No SEEPROM available.\n", ahc_name(ahc));
+ ahc->flags |= AHC_USEDEFAULTS;
+ } else {
+ /*
+ * Put the data we've collected down into SRAM
+ * where ahc_init will find it.
+ */
+ int i;
+ int max_targ = sc.max_targets & CFMAXTARG;
+ uint16_t discenable;
+ uint16_t ultraenb;
+
+ discenable = 0;
+ ultraenb = 0;
+ if ((sc.adapter_control & CFULTRAEN) != 0) {
+ /*
+ * Determine if this adapter has a "newstyle"
+ * SEEPROM format.
+ */
+ for (i = 0; i < max_targ; i++) {
+ if ((sc.device_flags[i] & CFSYNCHISULTRA) != 0){
+ ahc->flags |= AHC_NEWEEPROM_FMT;
+ break;
+ }
+ }
+ }
+
+ for (i = 0; i < max_targ; i++) {
+ u_int scsirate;
+ uint16_t target_mask;
+
+ target_mask = 0x01 << i;
+ if (sc.device_flags[i] & CFDISC)
+ discenable |= target_mask;
+ if ((ahc->flags & AHC_NEWEEPROM_FMT) != 0) {
+ if ((sc.device_flags[i] & CFSYNCHISULTRA) != 0)
+ ultraenb |= target_mask;
+ } else if ((sc.adapter_control & CFULTRAEN) != 0) {
+ ultraenb |= target_mask;
+ }
+ if ((sc.device_flags[i] & CFXFER) == 0x04
+ && (ultraenb & target_mask) != 0) {
+ /* Treat 10MHz as a non-ultra speed */
+ sc.device_flags[i] &= ~CFXFER;
+ ultraenb &= ~target_mask;
+ }
+ if ((ahc->features & AHC_ULTRA2) != 0) {
+ u_int offset;
+
+ if (sc.device_flags[i] & CFSYNCH)
+ offset = MAX_OFFSET_ULTRA2;
+ else
+ offset = 0;
+ ahc_outb(ahc, TARG_OFFSET + i, offset);
+
+ /*
+ * The ultra enable bits contain the
+ * high bit of the ultra2 sync rate
+ * field.
+ */
+ scsirate = (sc.device_flags[i] & CFXFER)
+ | ((ultraenb & target_mask)
+ ? 0x8 : 0x0);
+ if (sc.device_flags[i] & CFWIDEB)
+ scsirate |= WIDEXFER;
+ } else {
+ scsirate = (sc.device_flags[i] & CFXFER) << 4;
+ if (sc.device_flags[i] & CFSYNCH)
+ scsirate |= SOFS;
+ if (sc.device_flags[i] & CFWIDEB)
+ scsirate |= WIDEXFER;
+ }
+ ahc_outb(ahc, TARG_SCSIRATE + i, scsirate);
+ }
+ ahc->our_id = sc.brtime_id & CFSCSIID;
+
+ scsi_conf = (ahc->our_id & 0x7);
+ if (sc.adapter_control & CFSPARITY)
+ scsi_conf |= ENSPCHK;
+ if (sc.adapter_control & CFRESETB)
+ scsi_conf |= RESET_SCSI;
+
+ if ((sc.adapter_control & CFCHNLBPRIMARY) != 0
+ && (ahc->features & AHC_MULTI_FUNC) != 0)
+ ahc->flags |= AHC_CHANNEL_B_PRIMARY;
+
+ if (sc.bios_control & CFEXTEND)
+ ahc->flags |= AHC_EXTENDED_TRANS_A;
+
+ if (sc.bios_control & CFBIOSEN)
+ ahc->flags |= AHC_BIOS_ENABLED;
+ if (ahc->features & AHC_ULTRA
+ && (ahc->flags & AHC_NEWEEPROM_FMT) == 0) {
+ /* Should we enable Ultra mode? */
+ if (!(sc.adapter_control & CFULTRAEN))
+ /* Treat us as a non-ultra card */
+ ultraenb = 0;
+ }
+
+ if (sc.signature == CFSIGNATURE) {
+ uint32_t devconfig;
+
+ /* Honor the STPWLEVEL settings */
+ devconfig = ahc_pci_read_config(ahc->dev_softc,
+ DEVCONFIG, /*bytes*/4);
+ devconfig &= ~STPWLEVEL;
+ if ((sc.bios_control & CFSTPWLEVEL) != 0)
+ devconfig |= STPWLEVEL;
+ ahc_pci_write_config(ahc->dev_softc, DEVCONFIG,
+ devconfig, /*bytes*/4);
+ }
+ /* Set SCSICONF info */
+ ahc_outb(ahc, SCSICONF, scsi_conf);
+ ahc_outb(ahc, DISC_DSB, ~(discenable & 0xff));
+ ahc_outb(ahc, DISC_DSB + 1, ~((discenable >> 8) & 0xff));
+ ahc_outb(ahc, ULTRA_ENB, ultraenb & 0xff);
+ ahc_outb(ahc, ULTRA_ENB + 1, (ultraenb >> 8) & 0xff);
+ }
+
+ /*
+ * Cards that have the external logic necessary to talk to
+ * a SEEPROM, are almost certain to have the remaining logic
+ * necessary for auto-termination control. This assumption
+ * hasn't failed yet...
+ */
+ have_autoterm = have_seeprom;
+ if (have_seeprom)
+ adapter_control = sc.adapter_control;
+ else
+ adapter_control = CFAUTOTERM;
+
+ /*
+ * Some low-cost chips have SEEPROM and auto-term control built
+ * in, instead of using a GAL. They can tell us directly
+ * if the termination logic is enabled.
+ */
+ if ((ahc->features & AHC_SPIOCAP) != 0) {
+ if ((ahc_inb(ahc, SPIOCAP) & SSPIOCPS) != 0)
+ have_autoterm = TRUE;
+ else
+ have_autoterm = FALSE;
+ }
+
+ if (have_autoterm)
+ configure_termination(ahc, &sd, adapter_control, sxfrctl1);
+
+ release_seeprom(&sd);
+}
+
+static void
+configure_termination(struct ahc_softc *ahc,
+ struct seeprom_descriptor *sd,
+ u_int adapter_control,
+ u_int *sxfrctl1)
+{
+ uint8_t brddat;
+
+ brddat = 0;
+
+ /*
+ * Update the settings in sxfrctl1 to match the
+ * termination settings
+ */
+ *sxfrctl1 = 0;
+
+ /*
+ * SEECS must be on for the GALS to latch
+ * the data properly. Be sure to leave MS
+ * on or we will release the seeprom.
+ */
+ SEEPROM_OUTB(sd, sd->sd_MS | sd->sd_CS);
+ if ((adapter_control & CFAUTOTERM) != 0
+ || (ahc->features & AHC_NEW_TERMCTL) != 0) {
+ int internal50_present;
+ int internal68_present;
+ int externalcable_present;
+ int eeprom_present;
+ int enableSEC_low;
+ int enableSEC_high;
+ int enablePRI_low;
+ int enablePRI_high;
+ int sum;
+
+ enableSEC_low = 0;
+ enableSEC_high = 0;
+ enablePRI_low = 0;
+ enablePRI_high = 0;
+ if ((ahc->features & AHC_NEW_TERMCTL) != 0) {
+ ahc_new_term_detect(ahc, &enableSEC_low,
+ &enableSEC_high,
+ &enablePRI_low,
+ &enablePRI_high,
+ &eeprom_present);
+ if ((adapter_control & CFSEAUTOTERM) == 0) {
+ if (bootverbose)
+ printf("%s: Manual SE Termination\n",
+ ahc_name(ahc));
+ enableSEC_low = (adapter_control & CFSELOWTERM);
+ enableSEC_high =
+ (adapter_control & CFSEHIGHTERM);
+ }
+ if ((adapter_control & CFAUTOTERM) == 0) {
+ if (bootverbose)
+ printf("%s: Manual LVD Termination\n",
+ ahc_name(ahc));
+ enablePRI_low = (adapter_control & CFSTERM);
+ enablePRI_high = (adapter_control & CFWSTERM);
+ }
+ /* Make the table calculations below happy */
+ internal50_present = 0;
+ internal68_present = 1;
+ externalcable_present = 1;
+ } else if ((ahc->features & AHC_SPIOCAP) != 0) {
+ aic785X_cable_detect(ahc, &internal50_present,
+ &externalcable_present,
+ &eeprom_present);
+ } else {
+ aic787X_cable_detect(ahc, &internal50_present,
+ &internal68_present,
+ &externalcable_present,
+ &eeprom_present);
+ }
+
+ if ((ahc->features & AHC_WIDE) == 0)
+ internal68_present = 0;
+
+ if (bootverbose
+ && (ahc->features & AHC_ULTRA2) == 0) {
+ printf("%s: internal 50 cable %s present",
+ ahc_name(ahc),
+ internal50_present ? "is":"not");
+
+ if ((ahc->features & AHC_WIDE) != 0)
+ printf(", internal 68 cable %s present",
+ internal68_present ? "is":"not");
+ printf("\n%s: external cable %s present\n",
+ ahc_name(ahc),
+ externalcable_present ? "is":"not");
+ }
+ if (bootverbose)
+ printf("%s: BIOS eeprom %s present\n",
+ ahc_name(ahc), eeprom_present ? "is" : "not");
+
+ if ((ahc->flags & AHC_INT50_SPEEDFLEX) != 0) {
+ /*
+ * The 50 pin connector is a separate bus,
+ * so force it to always be terminated.
+ * In the future, perform current sensing
+ * to determine if we are in the middle of
+ * a properly terminated bus.
+ */
+ internal50_present = 0;
+ }
+
+ /*
+ * Now set the termination based on what
+ * we found.
+ * Flash Enable = BRDDAT7
+ * Secondary High Term Enable = BRDDAT6
+ * Secondary Low Term Enable = BRDDAT5 (7890)
+ * Primary High Term Enable = BRDDAT4 (7890)
+ */
+ if ((ahc->features & AHC_ULTRA2) == 0
+ && (internal50_present != 0)
+ && (internal68_present != 0)
+ && (externalcable_present != 0)) {
+ printf("%s: Illegal cable configuration!!. "
+ "Only two connectors on the "
+ "adapter may be used at a "
+ "time!\n", ahc_name(ahc));
+ }
+
+ if ((ahc->features & AHC_WIDE) != 0
+ && ((externalcable_present == 0)
+ || (internal68_present == 0)
+ || (enableSEC_high != 0))) {
+ brddat |= BRDDAT6;
+ if (bootverbose) {
+ if ((ahc->flags & AHC_INT50_SPEEDFLEX) != 0)
+ printf("%s: 68 pin termination "
+ "Enabled\n", ahc_name(ahc));
+ else
+ printf("%s: %sHigh byte termination "
+ "Enabled\n", ahc_name(ahc),
+ enableSEC_high ? "Secondary "
+ : "");
+ }
+ }
+
+ sum = internal50_present + internal68_present
+ + externalcable_present;
+ if (sum < 2 || (enableSEC_low != 0)) {
+ if ((ahc->features & AHC_ULTRA2) != 0)
+ brddat |= BRDDAT5;
+ else
+ *sxfrctl1 |= STPWEN;
+ if (bootverbose) {
+ if ((ahc->flags & AHC_INT50_SPEEDFLEX) != 0)
+ printf("%s: 50 pin termination "
+ "Enabled\n", ahc_name(ahc));
+ else
+ printf("%s: %sLow byte termination "
+ "Enabled\n", ahc_name(ahc),
+ enableSEC_low ? "Secondary "
+ : "");
+ }
+ }
+
+ if (enablePRI_low != 0) {
+ *sxfrctl1 |= STPWEN;
+ if (bootverbose)
+ printf("%s: Primary Low Byte termination "
+ "Enabled\n", ahc_name(ahc));
+ }
+
+ /*
+ * Setup STPWEN before setting up the rest of
+ * the termination per the tech note on the U160 cards.
+ */
+ ahc_outb(ahc, SXFRCTL1, *sxfrctl1);
+
+ if (enablePRI_high != 0) {
+ brddat |= BRDDAT4;
+ if (bootverbose)
+ printf("%s: Primary High Byte "
+ "termination Enabled\n",
+ ahc_name(ahc));
+ }
+
+ write_brdctl(ahc, brddat);
+
+ } else {
+ if ((adapter_control & CFSTERM) != 0) {
+ *sxfrctl1 |= STPWEN;
+
+ if (bootverbose)
+ printf("%s: %sLow byte termination Enabled\n",
+ ahc_name(ahc),
+ (ahc->features & AHC_ULTRA2) ? "Primary "
+ : "");
+ }
+
+ if ((adapter_control & CFWSTERM) != 0
+ && (ahc->features & AHC_WIDE) != 0) {
+ brddat |= BRDDAT6;
+ if (bootverbose)
+ printf("%s: %sHigh byte termination Enabled\n",
+ ahc_name(ahc),
+ (ahc->features & AHC_ULTRA2)
+ ? "Secondary " : "");
+ }
+
+ /*
+ * Setup STPWEN before setting up the rest of
+ * the termination per the tech note on the U160 cards.
+ */
+ ahc_outb(ahc, SXFRCTL1, *sxfrctl1);
+
+ if ((ahc->features & AHC_WIDE) != 0)
+ write_brdctl(ahc, brddat);
+ }
+ SEEPROM_OUTB(sd, sd->sd_MS); /* Clear CS */
+}
+
+static void
+ahc_new_term_detect(struct ahc_softc *ahc, int *enableSEC_low,
+ int *enableSEC_high, int *enablePRI_low,
+ int *enablePRI_high, int *eeprom_present)
+{
+ uint8_t brdctl;
+
+ /*
+ * BRDDAT7 = Eeprom
+ * BRDDAT6 = Enable Secondary High Byte termination
+ * BRDDAT5 = Enable Secondary Low Byte termination
+ * BRDDAT4 = Enable Primary high byte termination
+ * BRDDAT3 = Enable Primary low byte termination
+ */
+ brdctl = read_brdctl(ahc);
+ *eeprom_present = brdctl & BRDDAT7;
+ *enableSEC_high = (brdctl & BRDDAT6);
+ *enableSEC_low = (brdctl & BRDDAT5);
+ *enablePRI_high = (brdctl & BRDDAT4);
+ *enablePRI_low = (brdctl & BRDDAT3);
+}
+
+static void
+aic787X_cable_detect(struct ahc_softc *ahc, int *internal50_present,
+ int *internal68_present, int *externalcable_present,
+ int *eeprom_present)
+{
+ uint8_t brdctl;
+
+ /*
+ * First read the status of our cables.
+ * Set the rom bank to 0 since the
+ * bank setting serves as a multiplexor
+ * for the cable detection logic.
+ * BRDDAT5 controls the bank switch.
+ */
+ write_brdctl(ahc, 0);
+
+ /*
+ * Now read the state of the internal
+ * connectors. BRDDAT6 is INT50 and
+ * BRDDAT7 is INT68.
+ */
+ brdctl = read_brdctl(ahc);
+ *internal50_present = (brdctl & BRDDAT6) ? 0 : 1;
+ *internal68_present = (brdctl & BRDDAT7) ? 0 : 1;
+
+ /*
+ * Set the rom bank to 1 and determine
+ * the other signals.
+ */
+ write_brdctl(ahc, BRDDAT5);
+
+ /*
+ * Now read the state of the external
+ * connectors. BRDDAT6 is EXT68 and
+ * BRDDAT7 is EPROMPS.
+ */
+ brdctl = read_brdctl(ahc);
+ *externalcable_present = (brdctl & BRDDAT6) ? 0 : 1;
+ *eeprom_present = (brdctl & BRDDAT7) ? 1 : 0;
+}
+
+static void
+aic785X_cable_detect(struct ahc_softc *ahc, int *internal50_present,
+ int *externalcable_present, int *eeprom_present)
+{
+ uint8_t brdctl;
+
+ ahc_outb(ahc, BRDCTL, BRDRW|BRDCS);
+ ahc_outb(ahc, BRDCTL, 0);
+ brdctl = ahc_inb(ahc, BRDCTL);
+ *internal50_present = (brdctl & BRDDAT5) ? 0 : 1;
+ *externalcable_present = (brdctl & BRDDAT6) ? 0 : 1;
+
+ *eeprom_present = (ahc_inb(ahc, SPIOCAP) & EEPROM) ? 1 : 0;
+}
+
+static int
+acquire_seeprom(struct ahc_softc *ahc, struct seeprom_descriptor *sd)
+{
+ int wait;
+
+ if ((ahc->features & AHC_SPIOCAP) != 0
+ && (ahc_inb(ahc, SPIOCAP) & SEEPROM) == 0)
+ return (0);
+
+ /*
+ * Request access of the memory port. When access is
+ * granted, SEERDY will go high. We use a 1 second
+ * timeout which should be near 1 second more than
+ * is needed. Reason: after the chip reset, there
+ * should be no contention.
+ */
+ SEEPROM_OUTB(sd, sd->sd_MS);
+ wait = 1000; /* 1 second timeout in msec */
+ while (--wait && ((SEEPROM_STATUS_INB(sd) & sd->sd_RDY) == 0)) {
+ ahc_delay(1000); /* delay 1 msec */
+ }
+ if ((SEEPROM_STATUS_INB(sd) & sd->sd_RDY) == 0) {
+ SEEPROM_OUTB(sd, 0);
+ return (0);
+ }
+ return(1);
+}
+
+static void
+release_seeprom(struct seeprom_descriptor *sd)
+{
+ /* Release access to the memory port and the serial EEPROM. */
+ SEEPROM_OUTB(sd, 0);
+}
+
+static void
+write_brdctl(struct ahc_softc *ahc, uint8_t value)
+{
+ uint8_t brdctl;
+
+ if ((ahc->chip & AHC_CHIPID_MASK) == AHC_AIC7895) {
+ brdctl = BRDSTB;
+ if (ahc->channel == 'B')
+ brdctl |= BRDCS;
+ } else if ((ahc->features & AHC_ULTRA2) != 0) {
+ brdctl = 0;
+ } else {
+ brdctl = BRDSTB|BRDCS;
+ }
+ ahc_outb(ahc, BRDCTL, brdctl);
+ ahc_flush_device_writes(ahc);
+ brdctl |= value;
+ ahc_outb(ahc, BRDCTL, brdctl);
+ ahc_flush_device_writes(ahc);
+ if ((ahc->features & AHC_ULTRA2) != 0)
+ brdctl |= BRDSTB_ULTRA2;
+ else
+ brdctl &= ~BRDSTB;
+ ahc_outb(ahc, BRDCTL, brdctl);
+ ahc_flush_device_writes(ahc);
+ if ((ahc->features & AHC_ULTRA2) != 0)
+ brdctl = 0;
+ else
+ brdctl &= ~BRDCS;
+ ahc_outb(ahc, BRDCTL, brdctl);
+}
+
+static uint8_t
+read_brdctl(ahc)
+ struct ahc_softc *ahc;
+{
+ uint8_t brdctl;
+ uint8_t value;
+
+ if ((ahc->chip & AHC_CHIPID_MASK) == AHC_AIC7895) {
+ brdctl = BRDRW;
+ if (ahc->channel == 'B')
+ brdctl |= BRDCS;
+ } else if ((ahc->features & AHC_ULTRA2) != 0) {
+ brdctl = BRDRW_ULTRA2;
+ } else {
+ brdctl = BRDRW|BRDCS;
+ }
+ ahc_outb(ahc, BRDCTL, brdctl);
+ ahc_flush_device_writes(ahc);
+ value = ahc_inb(ahc, BRDCTL);
+ ahc_outb(ahc, BRDCTL, 0);
+ return (value);
+}
+
+#define DPE 0x80
+#define SSE 0x40
+#define RMA 0x20
+#define RTA 0x10
+#define STA 0x08
+#define DPR 0x01
+
+void
+ahc_pci_intr(struct ahc_softc *ahc)
+{
+ u_int error;
+ u_int status1;
+
+ error = ahc_inb(ahc, ERROR);
+ if ((error & PCIERRSTAT) == 0)
+ return;
+
+ status1 = ahc_pci_read_config(ahc->dev_softc,
+ PCIR_STATUS + 1, /*bytes*/1);
+
+ printf("%s: PCI error Interrupt at seqaddr = 0x%x\n",
+ ahc_name(ahc),
+ ahc_inb(ahc, SEQADDR0) | (ahc_inb(ahc, SEQADDR1) << 8));
+
+ if (status1 & DPE) {
+ printf("%s: Data Parity Error Detected during address "
+ "or write data phase\n", ahc_name(ahc));
+ }
+ if (status1 & SSE) {
+ printf("%s: Signal System Error Detected\n", ahc_name(ahc));
+ }
+ if (status1 & RMA) {
+ printf("%s: Received a Master Abort\n", ahc_name(ahc));
+ }
+ if (status1 & RTA) {
+ printf("%s: Received a Target Abort\n", ahc_name(ahc));
+ }
+ if (status1 & STA) {
+ printf("%s: Signaled a Target Abort\n", ahc_name(ahc));
+ }
+ if (status1 & DPR) {
+ printf("%s: Data Parity Error has been reported via PERR#\n",
+ ahc_name(ahc));
+ }
+ if ((status1 & (DPE|SSE|RMA|RTA|STA|DPR)) == 0) {
+ printf("%s: Latched PCIERR interrupt with "
+ "no status bits set\n", ahc_name(ahc));
+ }
+ ahc_pci_write_config(ahc->dev_softc, PCIR_STATUS + 1,
+ status1, /*bytes*/1);
+
+ if (status1 & (DPR|RMA|RTA)) {
+ ahc_outb(ahc, CLRINT, CLRPARERR);
+ }
+
+ unpause_sequencer(ahc);
+}
+
+static int
+ahc_aic785X_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
+{
+ uint8_t rev;
+
+ probe_config->channel = 'A';
+ probe_config->chip = AHC_AIC7850;
+ probe_config->features = AHC_AIC7850_FE;
+ probe_config->bugs |= AHC_TMODE_WIDEODD_BUG|AHC_CACHETHEN_BUG
+ | AHC_PCI_MWI_BUG;
+ rev = ahc_pci_read_config(pci, PCIR_REVID, /*bytes*/1);
+ if (rev >= 1)
+ probe_config->bugs |= AHC_PCI_2_1_RETRY_BUG;
+ return (0);
+}
+
+static int
+ahc_aic7860_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
+{
+ uint8_t rev;
+
+ probe_config->channel = 'A';
+ probe_config->chip = AHC_AIC7860;
+ probe_config->features = AHC_AIC7860_FE;
+ probe_config->bugs |= AHC_TMODE_WIDEODD_BUG|AHC_CACHETHEN_BUG
+ | AHC_PCI_MWI_BUG;
+ rev = ahc_pci_read_config(pci, PCIR_REVID, /*bytes*/1);
+ if (rev >= 1)
+ probe_config->bugs |= AHC_PCI_2_1_RETRY_BUG;
+ return (0);
+}
+
+static int
+ahc_apa1480_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
+{
+ int error;
+
+ error = ahc_aic7860_setup(pci, probe_config);
+ if (error != 0)
+ return (error);
+ probe_config->features |= AHC_REMOVABLE;
+ return (0);
+}
+
+static int
+ahc_aic7870_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
+{
+ probe_config->channel = 'A';
+ probe_config->chip = AHC_AIC7870;
+ probe_config->features = AHC_AIC7870_FE;
+ probe_config->bugs |= AHC_TMODE_WIDEODD_BUG|AHC_CACHETHEN_BUG
+ | AHC_PCI_MWI_BUG;
+ return (0);
+}
+
+static int
+ahc_aha394X_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
+{
+ int error;
+
+ error = ahc_aic7870_setup(pci, probe_config);
+ if (error == 0)
+ error = ahc_aha394XX_setup(pci, probe_config);
+ return (error);
+}
+
+static int
+ahc_aha398X_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
+{
+ int error;
+
+ error = ahc_aic7870_setup(pci, probe_config);
+ if (error == 0)
+ error = ahc_aha398XX_setup(pci, probe_config);
+ return (error);
+}
+
+static int
+ahc_aha494X_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
+{
+ int error;
+
+ error = ahc_aic7870_setup(pci, probe_config);
+ if (error == 0)
+ error = ahc_aha494XX_setup(pci, probe_config);
+ return (error);
+}
+
+static int
+ahc_aic7880_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
+{
+ uint8_t rev;
+
+ probe_config->channel = 'A';
+ probe_config->chip = AHC_AIC7880;
+ probe_config->features = AHC_AIC7880_FE;
+ probe_config->bugs |= AHC_TMODE_WIDEODD_BUG;
+ rev = ahc_pci_read_config(pci, PCIR_REVID, /*bytes*/1);
+ if (rev >= 1) {
+ probe_config->bugs |= AHC_PCI_2_1_RETRY_BUG;
+ } else {
+ probe_config->bugs |= AHC_CACHETHEN_BUG|AHC_PCI_MWI_BUG;
+ }
+ return (0);
+}
+
+static int
+ahc_aha2940Pro_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
+{
+ int error;
+
+ probe_config->flags |= AHC_INT50_SPEEDFLEX;
+ error = ahc_aic7880_setup(pci, probe_config);
+ return (0);
+}
+
+static int
+ahc_aha394XU_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
+{
+ int error;
+
+ error = ahc_aic7880_setup(pci, probe_config);
+ if (error == 0)
+ error = ahc_aha394XX_setup(pci, probe_config);
+ return (error);
+}
+
+static int
+ahc_aha398XU_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
+{
+ int error;
+
+ error = ahc_aic7880_setup(pci, probe_config);
+ if (error == 0)
+ error = ahc_aha398XX_setup(pci, probe_config);
+ return (error);
+}
+
+static int
+ahc_aic7890_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
+{
+ uint8_t rev;
+
+ probe_config->channel = 'A';
+ probe_config->chip = AHC_AIC7890;
+ probe_config->features = AHC_AIC7890_FE;
+ probe_config->flags |= AHC_NEWEEPROM_FMT;
+ rev = ahc_pci_read_config(pci, PCIR_REVID, /*bytes*/1);
+ if (rev == 0)
+ probe_config->bugs |= AHC_AUTOFLUSH_BUG|AHC_CACHETHEN_BUG;
+ return (0);
+}
+
+static int
+ahc_aic7892_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
+{
+ probe_config->channel = 'A';
+ probe_config->chip = AHC_AIC7892;
+ probe_config->features = AHC_AIC7892_FE;
+ probe_config->flags |= AHC_NEWEEPROM_FMT;
+ probe_config->bugs |= AHC_SCBCHAN_UPLOAD_BUG;
+ return (0);
+}
+
+static int
+ahc_aic7895_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
+{
+ uint8_t rev;
+
+ probe_config->channel = ahc_get_pci_function(pci) == 1 ? 'B' : 'A';
+ /*
+ * The 'C' revision of the aic7895 has a few additional features.
+ */
+ rev = ahc_pci_read_config(pci, PCIR_REVID, /*bytes*/1);
+ if (rev >= 4) {
+ probe_config->chip = AHC_AIC7895C;
+ probe_config->features = AHC_AIC7895C_FE;
+ } else {
+ u_int command;
+
+ probe_config->chip = AHC_AIC7895;
+ probe_config->features = AHC_AIC7895_FE;
+
+ /*
+ * The BIOS disables the use of MWI transactions
+ * since it does not have the MWI bug work around
+ * we have. Disabling MWI reduces performance, so
+ * turn it on again.
+ */
+ command = ahc_pci_read_config(pci, PCIR_COMMAND, /*bytes*/1);
+ command |= PCIM_CMD_MWRICEN;
+ ahc_pci_write_config(pci, PCIR_COMMAND, command, /*bytes*/1);
+ probe_config->bugs |= AHC_PCI_MWI_BUG;
+ }
+ /*
+ * XXX Does CACHETHEN really not work??? What about PCI retry?
+ * on C level chips. Need to test, but for now, play it safe.
+ */
+ probe_config->bugs |= AHC_TMODE_WIDEODD_BUG|AHC_PCI_2_1_RETRY_BUG
+ | AHC_CACHETHEN_BUG;
+
+#if 0
+ uint32_t devconfig;
+
+ /*
+ * Cachesize must also be zero due to stray DAC
+ * problem when sitting behind some bridges.
+ */
+ ahc_pci_write_config(pci, CSIZE_LATTIME, 0, /*bytes*/1);
+ devconfig = ahc_pci_read_config(pci, DEVCONFIG, /*bytes*/1);
+ devconfig |= MRDCEN;
+ ahc_pci_write_config(pci, DEVCONFIG, devconfig, /*bytes*/1);
+#endif
+ probe_config->flags |= AHC_NEWEEPROM_FMT;
+ return (0);
+}
+
+static int
+ahc_aic7896_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
+{
+ probe_config->channel = ahc_get_pci_function(pci) == 1 ? 'B' : 'A';
+ probe_config->chip = AHC_AIC7896;
+ probe_config->features = AHC_AIC7896_FE;
+ probe_config->flags |= AHC_NEWEEPROM_FMT;
+ probe_config->bugs |= AHC_CACHETHEN_DIS_BUG;
+ return (0);
+}
+
+static int
+ahc_aic7899_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
+{
+ probe_config->channel = ahc_get_pci_function(pci) == 1 ? 'B' : 'A';
+ probe_config->chip = AHC_AIC7899;
+ probe_config->features = AHC_AIC7899_FE;
+ probe_config->flags |= AHC_NEWEEPROM_FMT;
+ probe_config->bugs |= AHC_SCBCHAN_UPLOAD_BUG;
+ return (0);
+}
+
+static int
+ahc_aha29160C_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
+{
+ int error;
+
+ error = ahc_aic7899_setup(pci, probe_config);
+ if (error != 0)
+ return (error);
+ probe_config->features |= AHC_REMOVABLE;
+ return (0);
+}
+
+static int
+ahc_raid_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
+{
+ printf("RAID functionality unsupported\n");
+ return (ENXIO);
+}
+
+static int
+ahc_aha394XX_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
+{
+ switch (ahc_get_pci_slot(pci)) {
+ case AHC_394X_SLOT_CHANNEL_A:
+ probe_config->channel = 'A';
+ break;
+ case AHC_394X_SLOT_CHANNEL_B:
+ probe_config->channel = 'B';
+ break;
+ default:
+ printf("adapter at unexpected slot %d\n"
+ "unable to map to a channel\n",
+ ahc_get_pci_slot(pci));
+ probe_config->channel = 'A';
+ }
+ return (0);
+}
+
+static int
+ahc_aha398XX_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
+{
+ switch (ahc_get_pci_slot(pci)) {
+ case AHC_398X_SLOT_CHANNEL_A:
+ probe_config->channel = 'A';
+ break;
+ case AHC_398X_SLOT_CHANNEL_B:
+ probe_config->channel = 'B';
+ break;
+ case AHC_398X_SLOT_CHANNEL_C:
+ probe_config->channel = 'C';
+ break;
+ default:
+ printf("adapter at unexpected slot %d\n"
+ "unable to map to a channel\n",
+ ahc_get_pci_slot(pci));
+ probe_config->channel = 'A';
+ break;
+ }
+ probe_config->flags |= AHC_LARGE_SEEPROM;
+ return (0);
+}
+
+static int
+ahc_aha494XX_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
+{
+ switch (ahc_get_pci_slot(pci)) {
+ case AHC_494X_SLOT_CHANNEL_A:
+ probe_config->channel = 'A';
+ break;
+ case AHC_494X_SLOT_CHANNEL_B:
+ probe_config->channel = 'B';
+ break;
+ case AHC_494X_SLOT_CHANNEL_C:
+ probe_config->channel = 'C';
+ break;
+ case AHC_494X_SLOT_CHANNEL_D:
+ probe_config->channel = 'D';
+ break;
+ default:
+ printf("adapter at unexpected slot %d\n"
+ "unable to map to a channel\n",
+ ahc_get_pci_slot(pci));
+ probe_config->channel = 'A';
+ }
+ probe_config->flags |= AHC_LARGE_SEEPROM;
+ return (0);
+}
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)