patch-2.4.6 linux/drivers/scsi/NCR53c406a.c

Next file: linux/drivers/scsi/aha152x.c
Previous file: linux/drivers/scsi/3w-xxxx.h
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.4.5/linux/drivers/scsi/NCR53c406a.c linux/drivers/scsi/NCR53c406a.c
@@ -221,7 +221,7 @@
     (void *)0xc8000
 };
 #define ADDRESS_COUNT (sizeof( addresses ) / sizeof( unsigned ))
-#endif USE_BIOS
+#endif /* USE_BIOS */
 		       
 /* possible i/o port addresses */
 static unsigned short ports[] =
@@ -244,7 +244,7 @@
     { "Copyright (C) Acculogic, Inc.\r\n2.8M Diskette Extension Bios ver 4.04.03 03/01/1993", 61, 82 },
 };
 #define SIGNATURE_COUNT (sizeof( signatures ) / sizeof( struct signature ))
-#endif USE_BIOS
+#endif /* USE_BIOS */
 
 /* ============================================================ */
 
@@ -347,7 +347,7 @@
     
     return tmp;
 }
-#endif USE_DMA
+#endif /* USE_DMA */
 
 #if USE_PIO
 static __inline__ int NCR53c406a_pio_read(unsigned char *request, 
@@ -455,7 +455,7 @@
     }
     return 0;
 }
-#endif USE_PIO
+#endif /* USE_PIO */
 
 int  __init 
 NCR53c406a_detect(Scsi_Host_Template * tpnt){
@@ -481,7 +481,7 @@
     }
     
     DEB(printk("NCR53c406a BIOS found at %X\n", (unsigned int) bios_base););
-#endif USE_BIOS
+#endif /* USE_BIOS */
     
 #ifdef PORT_BASE
     if (!request_region(port_base, 0x10, "NCR53c406a")) /* ports already snatched */
@@ -512,7 +512,7 @@
             }
         }
     }
-#endif PORT_BASE
+#endif /* PORT_BASE */
     
     if(!port_base){		/* no ports found */
         printk("NCR53c406a: no available ports found\n");
@@ -550,7 +550,7 @@
 #if USE_DMA
         printk("NCR53c406a: No interrupts found and DMA mode defined. Giving up.\n");
         goto err_release;
-#endif USE_DMA
+#endif /* USE_DMA */
     }
     else {
         DEB(printk("NCR53c406a: Shouldn't get here!\n"));
@@ -565,7 +565,7 @@
     }
     
     DEB(printk("Allocated DMA channel %d\n", dma_chan));
-#endif USE_DMA 
+#endif /* USE_DMA */
     
     tpnt->present = 1;
     tpnt->proc_name = "NCR53c406a";
@@ -665,7 +665,7 @@
 }
 
 
-static void wait_intr() {
+static void wait_intr(void) {
     int i = jiffies + WATCHDOG;
     
     while(time_after(i,jiffies) && !(inb(STAT_REG)&0xe0)) /* wait for a pseudo-interrupt */
@@ -820,8 +820,8 @@
     printk("\n");
 #else
     printk(", pio=%02x\n", pio_status);
-#endif USE_DMA
-#endif NCR53C406A_DEBUG
+#endif /* USE_DMA */
+#endif /* NCR53C406A_DEBUG */
     
     if(int_reg & 0x80){         /* SCSI reset intr */
         rtrc(3);
@@ -840,7 +840,7 @@
         current_SC->scsi_done(current_SC);
         return;
     }
-#endif USE_PIO
+#endif /* USE_PIO */
     
     if(status & 0x20) {		/* Parity error */
         printk("NCR53c406a: Warning: parity error!\n");
@@ -885,7 +885,7 @@
 #if USE_DMA			/* No s/g support for DMA */
             NCR53c406a_dma_write(current_SC->request_buffer, 
                                  current_SC->request_bufflen);
-#endif USE_DMA
+#endif /* USE_DMA */
             outb(TRANSFER_INFO | DMA_OP, CMD_REG); 
 #if USE_PIO
             if (!current_SC->use_sg) /* Don't use scatter-gather */
@@ -900,7 +900,7 @@
                 }
             }
             REG0;
-#endif USE_PIO
+#endif /* USE_PIO */
         }
         break;
         
@@ -914,7 +914,7 @@
 #if USE_DMA			/* No s/g support for DMA */
             NCR53c406a_dma_read(current_SC->request_buffer, 
                                 current_SC->request_bufflen);
-#endif USE_DMA
+#endif /* USE_DMA */
             outb(TRANSFER_INFO | DMA_OP, CMD_REG); 
 #if USE_PIO
             if (!current_SC->use_sg) /* Don't use scatter-gather */
@@ -929,7 +929,7 @@
                 }
             }
             REG0;
-#endif USE_PIO
+#endif /* USE_PIO */
         }
         break;
         
@@ -981,7 +981,7 @@
 }
 
 #ifndef IRQ_LEV
-static int irq_probe()
+static int irq_probe(void)
 {
     int irqs, irq;
     int i;
@@ -1011,9 +1011,9 @@
     
     return irq;
 }
-#endif IRQ_LEV
+#endif /* IRQ_LEV */
 
-static void chip_init()
+static void chip_init(void)
 {
     REG1;
 #if USE_DMA

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)