commit 60a8261b1257b6ef226f572b34cffc7b5cb359c7 Author: Greg Kroah-Hartman Date: Wed Sep 13 14:04:00 2017 -0700 Linux 3.18.71 commit b766f0849a52e235268f362b7d8ec8bc36cdc7f0 Author: Richard Wareing Date: Wed Sep 13 09:09:35 2017 +1000 xfs: XFS_IS_REALTIME_INODE() should be false if no rt device present commit b31ff3cdf540110da4572e3e29bd172087af65cc upstream. If using a kernel with CONFIG_XFS_RT=y and we set the RHINHERIT flag on a directory in a filesystem that does not have a realtime device and create a new file in that directory, it gets marked as a real time file. When data is written and a fsync is issued, the filesystem attempts to flush a non-existent rt device during the fsync process. This results in a crash dereferencing a null buftarg pointer in xfs_blkdev_issue_flush(): BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: xfs_blkdev_issue_flush+0xd/0x20 ..... Call Trace: xfs_file_fsync+0x188/0x1c0 vfs_fsync_range+0x3b/0xa0 do_fsync+0x3d/0x70 SyS_fsync+0x10/0x20 do_syscall_64+0x4d/0xb0 entry_SYSCALL64_slow_path+0x25/0x25 Setting RT inode flags does not require special privileges so any unprivileged user can cause this oops to occur. To reproduce, confirm kernel is compiled with CONFIG_XFS_RT=y and run: # mkfs.xfs -f /dev/pmem0 # mount /dev/pmem0 /mnt/test # mkdir /mnt/test/foo # xfs_io -c 'chattr +t' /mnt/test/foo # xfs_io -f -c 'pwrite 0 5m' -c fsync /mnt/test/foo/bar Or just run xfstests with MKFS_OPTIONS="-d rtinherit=1" and wait. Kernels built with CONFIG_XFS_RT=n are not exposed to this bug. Fixes: f538d4da8d52 ("[XFS] write barrier support") Signed-off-by: Richard Wareing Signed-off-by: Dave Chinner Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 43d51814b7b3d57fbf7bac41f1f495adca6cd7f9 Author: Mark Rutland Date: Tue Aug 22 11:36:17 2017 +0100 ARM: 8692/1: mm: abort uaccess retries upon fatal signal commit 746a272e44141af24a02f6c9b0f65f4c4598ed42 upstream. When there's a fatal signal pending, arm's do_page_fault() implementation returns 0. The intent is that we'll return to the faulting userspace instruction, delivering the signal on the way. However, if we take a fatal signal during fixing up a uaccess, this results in a return to the faulting kernel instruction, which will be instantly retried, resulting in the same fault being taken forever. As the task never reaches userspace, the signal is not delivered, and the task is left unkillable. While the task is stuck in this state, it can inhibit the forward progress of the system. To avoid this, we must ensure that when a fatal signal is pending, we apply any necessary fixup for a faulting kernel instruction. Thus we will return to an error path, and it is up to that code to make forward progress towards delivering the fatal signal. Signed-off-by: Mark Rutland Reviewed-by: Steve Capper Signed-off-by: Russell King Signed-off-by: Greg Kroah-Hartman commit 090aa4651522ec35776896abe31c0a221689a14f Author: Ben Seri Date: Sat Sep 9 23:15:59 2017 +0200 Bluetooth: Properly check L2CAP config option output buffer length commit e860d2c904d1a9f38a24eb44c9f34b8f915a6ea3 upstream. Validate the output buffer length for L2CAP config requests and responses to avoid overflowing the stack buffer used for building the option blocks. Signed-off-by: Ben Seri Signed-off-by: Marcel Holtmann Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit bceac1033cd99ff5d2aaa69c700367f866bf6f04 Author: Takashi Iwai Date: Thu Jul 6 12:34:40 2017 +0200 ALSA: msnd: Optimize / harden DSP and MIDI loops commit 20e2b791796bd68816fa115f12be5320de2b8021 upstream. The ISA msnd drivers have loops fetching the ring-buffer head, tail and size values inside the loops. Such codes are inefficient and fragile. This patch optimizes it, and also adds the sanity check to avoid the endless loops. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196131 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196133 Signed-off-by: Takashi Iwai Signed-off-by: grygorii tertychnyi Signed-off-by: Greg Kroah-Hartman commit 8e7e643a6c6d565568a1634c61572d8f96e7f030 Author: Yang Shi Date: Thu Nov 10 13:06:39 2016 -0800 locktorture: Fix potential memory leak with rw lock test commit f4dbba591945dc301c302672adefba9e2ec08dc5 upstream. When running locktorture module with the below commands with kmemleak enabled: $ modprobe locktorture torture_type=rw_lock_irq $ rmmod locktorture The below kmemleak got caught: root@10:~# echo scan > /sys/kernel/debug/kmemleak [ 323.197029] kmemleak: 2 new suspected memory leaks (see /sys/kernel/debug/kmemleak) root@10:~# cat /sys/kernel/debug/kmemleak unreferenced object 0xffffffc07592d500 (size 128): comm "modprobe", pid 368, jiffies 4294924118 (age 205.824s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 c3 7b 02 00 00 00 00 00 .........{...... 00 00 00 00 00 00 00 00 d7 9b 02 00 00 00 00 00 ................ backtrace: [] create_object+0x110/0x288 [] kmemleak_alloc+0x58/0xa0 [] __kmalloc+0x234/0x318 [] 0xffffff80006fa130 [] do_one_initcall+0x44/0x138 [] do_init_module+0x68/0x1cc [] load_module+0x1a68/0x22e0 [] SyS_finit_module+0xe0/0xf0 [] el0_svc_naked+0x24/0x28 [] 0xffffffffffffffff unreferenced object 0xffffffc07592d480 (size 128): comm "modprobe", pid 368, jiffies 4294924118 (age 205.824s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 3b 6f 01 00 00 00 00 00 ........;o...... 00 00 00 00 00 00 00 00 23 6a 01 00 00 00 00 00 ........#j...... backtrace: [] create_object+0x110/0x288 [] kmemleak_alloc+0x58/0xa0 [] __kmalloc+0x234/0x318 [] 0xffffff80006fa22c [] do_one_initcall+0x44/0x138 [] do_init_module+0x68/0x1cc [] load_module+0x1a68/0x22e0 [] SyS_finit_module+0xe0/0xf0 [] el0_svc_naked+0x24/0x28 [] 0xffffffffffffffff It is because cxt.lwsa and cxt.lrsa don't get freed in module_exit, so free them in lock_torture_cleanup() and free writer_tasks if reader_tasks is failed at memory allocation. Signed-off-by: Yang Shi Signed-off-by: Paul E. McKenney Reviewed-by: Josh Triplett Cc: 石洋 Signed-off-by: Greg Kroah-Hartman commit b66950d5233bd4f4fce13e270b873bd893af7fe9 Author: Aleksa Sarai Date: Tue Jul 4 21:49:06 2017 +1000 btrfs: resume qgroup rescan on rw remount commit 6c6b5a39c4bf3dbd8cf629c9f5450e983c19dbb9 upstream. Several distributions mount the "proper root" as ro during initrd and then remount it as rw before pivot_root(2). Thus, if a rescan had been aborted by a previous shutdown, the rescan would never be resumed. This issue would manifest itself as several btrfs ioctl(2)s causing the entire machine to hang when btrfs_qgroup_wait_for_completion was hit (due to the fs_info->qgroup_rescan_running flag being set but the rescan itself not being resumed). Notably, Docker's btrfs storage driver makes regular use of BTRFS_QUOTA_CTL_DISABLE and BTRFS_IOC_QUOTA_RESCAN_WAIT (causing this problem to be manifested on boot for some machines). Cc: Jeff Mahoney Fixes: b382a324b60f ("Btrfs: fix qgroup rescan resume on mount") Signed-off-by: Aleksa Sarai Reviewed-by: Nikolay Borisov Tested-by: Nikolay Borisov Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit 19011e6ac194ef3feb014f9f61bc1123b1eeab7d Author: Todd Poynor Date: Tue Aug 15 21:48:43 2017 -0700 scsi: sg: recheck MMAP_IO request length with lock held commit 8d26f491116feaa0b16de370b6a7ba40a40fa0b4 upstream. Commit 1bc0eb044615 ("scsi: sg: protect accesses to 'reserved' page array") adds needed concurrency protection for the "reserve" buffer. Some checks that are initially made outside the lock are replicated once the lock is taken to ensure the checks and resulting decisions are made using consistent state. The check that a request with flag SG_FLAG_MMAP_IO set fits in the reserve buffer also needs to be performed again under the lock to ensure the reserve buffer length compared against matches the value in effect when the request is linked to the reserve buffer. An -ENOMEM should be returned in this case, instead of switching over to an indirect buffer as for non-MMAP_IO requests. Signed-off-by: Todd Poynor Acked-by: Douglas Gilbert Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit 57923c952ce8c71880309bb063c607485c0a41b8 Author: Todd Poynor Date: Tue Aug 15 22:41:08 2017 -0700 scsi: sg: protect against races between mmap() and SG_SET_RESERVED_SIZE commit 6a8dadcca81fceff9976e8828cceb072873b7bd5 upstream. Take f_mutex around mmap() processing to protect against races with the SG_SET_RESERVED_SIZE ioctl. Ensure the reserve buffer length remains consistent during the mapping operation, and set the "mmap called" flag to prevent further changes to the reserved buffer size as an atomic operation with the mapping. [mkp: fixed whitespace] Signed-off-by: Todd Poynor Acked-by: Douglas Gilbert Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit 61b491f57cbd0ab166df84e2ef7972938b2823c1 Author: Andrey Korolyov Date: Thu Aug 10 13:21:14 2017 +0300 cs5536: add support for IDE controller variant commit 591b6bb605785c12a21e8b07a08a277065b655a5 upstream. Several legacy devices such as Geode-based Cisco ASA appliances and DB800 development board do possess CS5536 IDE controller with different PCI id than existing one. Using pata_generic is not always feasible as at least DB800 requires MSR quirk from pata_cs5536 to be used with vendor firmware. Signed-off-by: Andrey Korolyov Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman commit 18f9ff5c8ad53a70aff203d79dc76fada3829101 Author: Ben Hutchings Date: Sun Sep 3 01:18:41 2017 +0100 workqueue: Fix flag collision commit fbf1c41fc0f4d3574ac2377245efd666c1fa3075 upstream. Commit 0a94efb5acbb ("workqueue: implicit ordered attribute should be overridable") introduced a __WQ_ORDERED_EXPLICIT flag but gave it the same value as __WQ_LEGACY. I don't believe these were intended to mean the same thing, so renumber __WQ_ORDERED_EXPLICIT. Fixes: 0a94efb5acbb ("workqueue: implicit ordered attribute should be ...") Signed-off-by: Ben Hutchings Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman commit e7023d138bb0edf64ee36aa7a7d1dc124cfdacdd Author: Doug Berger Date: Mon Jul 10 15:49:44 2017 -0700 cma: fix calculation of aligned offset commit e048cb32f69038aa1c8f11e5c1b331be4181659d upstream. The align_offset parameter is used by bitmap_find_next_zero_area_off() to represent the offset of map's base from the previous alignment boundary; the function ensures that the returned index, plus the align_offset, honors the specified align_mask. The logic introduced by commit b5be83e308f7 ("mm: cma: align to physical address, not CMA region position") has the cma driver calculate the offset to the *next* alignment boundary. In most cases, the base alignment is greater than that specified when making allocations, resulting in a zero offset whether we align up or down. In the example given with the commit, the base alignment (8MB) was half the requested alignment (16MB) so the math also happened to work since the offset is 8MB in both directions. However, when requesting allocations with an alignment greater than twice that of the base, the returned index would not be correctly aligned. Also, the align_order arguments of cma_bitmap_aligned_mask() and cma_bitmap_aligned_offset() should not be negative so the argument type was made unsigned. Fixes: b5be83e308f7 ("mm: cma: align to physical address, not CMA region position") Link: http://lkml.kernel.org/r/20170628170742.2895-1-opendmb@gmail.com Signed-off-by: Angus Clark Signed-off-by: Doug Berger Acked-by: Gregory Fong Cc: Doug Berger Cc: Angus Clark Cc: Laura Abbott Cc: Vlastimil Babka Cc: Greg Kroah-Hartman Cc: Lucas Stach Cc: Catalin Marinas Cc: Shiraz Hashim Cc: Jaewon Kim Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit fcd5675c40abe117d6fac182ac655ac3817f2b18 Author: Edwin Török Date: Thu Aug 3 10:30:06 2017 +0100 dlm: avoid double-free on error path in dlm_device_{register,unregister} commit 55acdd926f6b21a5cdba23da98a48aedf19ac9c3 upstream. Can be reproduced when running dlm_controld (tested on 4.4.x, 4.12.4): # seq 1 100 | xargs -P0 -n1 dlm_tool join # seq 1 100 | xargs -P0 -n1 dlm_tool leave misc_register fails due to duplicate sysfs entry, which causes dlm_device_register to free ls->ls_device.name. In dlm_device_deregister the name was freed again, causing memory corruption. According to the comment in dlm_device_deregister the name should've been set to NULL when registration fails, so this patch does that. sysfs: cannot create duplicate filename '/dev/char/10:1' ------------[ cut here ]------------ warning: cpu: 1 pid: 4450 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x56/0x70 modules linked in: msr rfcomm dlm ccm bnep dm_crypt uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core videodev btusb media btrtl btbcm btintel bluetooth ecdh_generic intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm snd_hda_codec_hdmi irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel thinkpad_acpi pcbc nvram snd_seq_midi snd_seq_midi_event aesni_intel snd_hda_codec_realtek snd_hda_codec_generic snd_rawmidi aes_x86_64 crypto_simd glue_helper snd_hda_intel snd_hda_codec cryptd intel_cstate arc4 snd_hda_core snd_seq snd_seq_device snd_hwdep iwldvm intel_rapl_perf mac80211 joydev input_leds iwlwifi serio_raw cfg80211 snd_pcm shpchp snd_timer snd mac_hid mei_me lpc_ich mei soundcore sunrpc parport_pc ppdev lp parport autofs4 i915 psmouse e1000e ahci libahci i2c_algo_bit sdhci_pci ptp drm_kms_helper sdhci pps_core syscopyarea sysfillrect sysimgblt fb_sys_fops drm wmi video cpu: 1 pid: 4450 comm: dlm_test.exe not tainted 4.12.4-041204-generic hardware name: lenovo 232425u/232425u, bios g2et82ww (2.02 ) 09/11/2012 task: ffff96b0cbabe140 task.stack: ffffb199027d0000 rip: 0010:sysfs_warn_dup+0x56/0x70 rsp: 0018:ffffb199027d3c58 eflags: 00010282 rax: 0000000000000038 rbx: ffff96b0e2c49158 rcx: 0000000000000006 rdx: 0000000000000000 rsi: 0000000000000086 rdi: ffff96b15e24dcc0 rbp: ffffb199027d3c70 r08: 0000000000000001 r09: 0000000000000721 r10: ffffb199027d3c00 r11: 0000000000000721 r12: ffffb199027d3cd1 r13: ffff96b1592088f0 r14: 0000000000000001 r15: ffffffffffffffef fs: 00007f78069c0700(0000) gs:ffff96b15e240000(0000) knlgs:0000000000000000 cs: 0010 ds: 0000 es: 0000 cr0: 0000000080050033 cr2: 000000178625ed28 cr3: 0000000091d3e000 cr4: 00000000001406e0 call trace: sysfs_do_create_link_sd.isra.2+0x9e/0xb0 sysfs_create_link+0x25/0x40 device_add+0x5a9/0x640 device_create_groups_vargs+0xe0/0xf0 device_create_with_groups+0x3f/0x60 ? snprintf+0x45/0x70 misc_register+0x140/0x180 device_write+0x6a8/0x790 [dlm] __vfs_write+0x37/0x160 ? apparmor_file_permission+0x1a/0x20 ? security_file_permission+0x3b/0xc0 vfs_write+0xb5/0x1a0 sys_write+0x55/0xc0 ? sys_fcntl+0x5d/0xb0 entry_syscall_64_fastpath+0x1e/0xa9 rip: 0033:0x7f78083454bd rsp: 002b:00007f78069bbd30 eflags: 00000293 orig_rax: 0000000000000001 rax: ffffffffffffffda rbx: 0000000000000006 rcx: 00007f78083454bd rdx: 000000000000009c rsi: 00007f78069bee00 rdi: 0000000000000005 rbp: 00007f77f8000a20 r08: 000000000000fcf0 r09: 0000000000000032 r10: 0000000000000024 r11: 0000000000000293 r12: 00007f78069bde00 r13: 00007f78069bee00 r14: 000000000000000a r15: 00007f78069bbd70 code: 85 c0 48 89 c3 74 12 b9 00 10 00 00 48 89 c2 31 f6 4c 89 ef e8 2c c8 ff ff 4c 89 e2 48 89 de 48 c7 c7 b0 8e 0c a8 e8 41 e8 ed ff <0f> ff 48 89 df e8 00 d5 f4 ff 5b 41 5c 41 5d 5d c3 66 0f 1f 84 ---[ end trace 40412246357cc9e0 ]--- dlm: 59f24629-ae39-44e2-9030-397ebc2eda26: leaving the lockspace group... bug: unable to handle kernel null pointer dereference at 0000000000000001 ip: [] kmem_cache_alloc+0x7a/0x140 pgd 0 oops: 0000 [#1] smp modules linked in: dlm 8021q garp mrp stp llc openvswitch nf_defrag_ipv6 nf_conntrack libcrc32c iptable_filter dm_multipath crc32_pclmul dm_mod aesni_intel psmouse aes_x86_64 sg ablk_helper cryptd lrw gf128mul glue_helper i2c_piix4 nls_utf8 tpm_tis tpm isofs nfsd auth_rpcgss oid_registry nfs_acl lockd grace sunrpc xen_wdt ip_tables x_tables autofs4 hid_generic usbhid hid sr_mod cdrom sd_mod ata_generic pata_acpi 8139too serio_raw ata_piix 8139cp mii uhci_hcd ehci_pci ehci_hcd libata scsi_dh_rdac scsi_dh_hp_sw scsi_dh_emc scsi_dh_alua scsi_mod ipv6 cpu: 0 pid: 394 comm: systemd-udevd tainted: g w 4.4.0+0 #1 hardware name: xen hvm domu, bios 4.7.2-2.2 05/11/2017 task: ffff880002410000 ti: ffff88000243c000 task.ti: ffff88000243c000 rip: e030:[] [] kmem_cache_alloc+0x7a/0x140 rsp: e02b:ffff88000243fd90 eflags: 00010202 rax: 0000000000000000 rbx: ffff8800029864d0 rcx: 000000000007b36c rdx: 000000000007b36b rsi: 00000000024000c0 rdi: ffff880036801c00 rbp: ffff88000243fdc0 r08: 0000000000018880 r09: 0000000000000054 r10: 000000000000004a r11: ffff880034ace6c0 r12: 00000000024000c0 r13: ffff880036801c00 r14: 0000000000000001 r15: ffffffff8118dcc2 fs: 00007f0ab77548c0(0000) gs:ffff880036e00000(0000) knlgs:0000000000000000 cs: e033 ds: 0000 es: 0000 cr0: 0000000080050033 cr2: 0000000000000001 cr3: 000000000332d000 cr4: 0000000000040660 stack: ffffffff8118dc90 ffff8800029864d0 0000000000000000 ffff88003430b0b0 ffff880034b78320 ffff88003430b0b0 ffff88000243fdf8 ffffffff8118dcc2 ffff8800349c6700 ffff8800029864d0 000000000000000b 00007f0ab7754b90 call trace: [] ? anon_vma_fork+0x60/0x140 [] anon_vma_fork+0x92/0x140 [] copy_process+0xcae/0x1a80 [] _do_fork+0x8b/0x2d0 [] sys_clone+0x19/0x20 [] entry_syscall_64_fastpath+0x12/0x71 ] code: f6 75 1c 4c 89 fa 44 89 e6 4c 89 ef e8 a7 e4 00 00 41 f7 c4 00 80 00 00 49 89 c6 74 47 eb 32 49 63 45 20 48 8d 4a 01 4d 8b 45 00 <49> 8b 1c 06 4c 89 f0 65 49 0f c7 08 0f 94 c0 84 c0 74 ac 49 63 rip [] kmem_cache_alloc+0x7a/0x140 rsp cr2: 0000000000000001 --[ end trace 70cb9fd1b164a0e8 ]-- Signed-off-by: Edwin Török Signed-off-by: David Teigland Signed-off-by: Greg Kroah-Hartman commit 524386e8e90a729f53cb248cda0dc59ff917cc4e Author: Oscar Campos Date: Tue Jul 18 17:20:36 2017 -0700 Input: trackpoint - assume 3 buttons when buttons detection fails commit 293b915fd9bebf33cdc906516fb28d54649a25ac upstream. Trackpoint buttons detection fails on ThinkPad 570 and 470 series, this makes the middle button of the trackpoint to not being recogized. As I don't believe there is any trackpoint with less than 3 buttons this patch just assumes three buttons when the extended button information read fails. Signed-off-by: Oscar Campos Acked-by: Peter Hutterer Signed-off-by: Dmitry Torokhov Signed-off-by: Aaron Ma Signed-off-by: Greg Kroah-Hartman commit 2c97bb69c0d097340981be9232f5ef3bf76bc147 Author: Christophe JAILLET Date: Tue Aug 29 21:23:49 2017 +0200 driver core: bus: Fix a potential double free commit 0f9b011d3321ca1079c7a46c18cb1956fbdb7bcb upstream. The .release function of driver_ktype is 'driver_release()'. This function frees the container_of this kobject. So, this memory must not be freed explicitly in the error handling path of 'bus_add_driver()'. Otherwise a double free will occur. Signed-off-by: Christophe JAILLET Signed-off-by: Greg Kroah-Hartman commit 158333ad9be61dd5fa75e5566665dc0eee892a2e Author: Colin Ian King Date: Fri Aug 18 14:34:16 2017 +0100 staging/rts5208: fix incorrect shift to extract upper nybble commit 34ff1bf4920471cff66775dc39537b15c5f0feff upstream. The mask of sns_key_info1 suggests the upper nybble is being extracted however the following shift of 8 bits is too large and always results in 0. Fix this by shifting only by 4 bits to correctly get the upper nybble. Detected by CoverityScan, CID#142891 ("Operands don't affect result") Fixes: fa590c222fba ("staging: rts5208: add support for rts5208 and rts5288") Signed-off-by: Colin Ian King Signed-off-by: Greg Kroah-Hartman commit d512a57678a695275bda7f218d4efccd4f89948c Author: Douglas Anderson Date: Thu Aug 10 15:42:22 2017 -0700 USB: core: Avoid race of async_completed() w/ usbdev_release() commit ed62ca2f4f51c17841ea39d98c0c409cb53a3e10 upstream. While running reboot tests w/ a specific set of USB devices (and slub_debug enabled), I found that once every few hours my device would be crashed with a stack that looked like this: [ 14.012445] BUG: spinlock bad magic on CPU#0, modprobe/2091 [ 14.012460] lock: 0xffffffc0cb055978, .magic: ffffffc0, .owner: cryption contexts: %lu/%lu [ 14.012460] /1025536097, .owner_cpu: 0 [ 14.012466] CPU: 0 PID: 2091 Comm: modprobe Not tainted 4.4.79 #352 [ 14.012468] Hardware name: Google Kevin (DT) [ 14.012471] Call trace: [ 14.012483] [<....>] dump_backtrace+0x0/0x160 [ 14.012487] [<....>] show_stack+0x20/0x28 [ 14.012494] [<....>] dump_stack+0xb4/0xf0 [ 14.012500] [<....>] spin_dump+0x8c/0x98 [ 14.012504] [<....>] spin_bug+0x30/0x3c [ 14.012508] [<....>] do_raw_spin_lock+0x40/0x164 [ 14.012515] [<....>] _raw_spin_lock_irqsave+0x64/0x74 [ 14.012521] [<....>] __wake_up+0x2c/0x60 [ 14.012528] [<....>] async_completed+0x2d0/0x300 [ 14.012534] [<....>] __usb_hcd_giveback_urb+0xc4/0x138 [ 14.012538] [<....>] usb_hcd_giveback_urb+0x54/0xf0 [ 14.012544] [<....>] xhci_irq+0x1314/0x1348 [ 14.012548] [<....>] usb_hcd_irq+0x40/0x50 [ 14.012553] [<....>] handle_irq_event_percpu+0x1b4/0x3f0 [ 14.012556] [<....>] handle_irq_event+0x4c/0x7c [ 14.012561] [<....>] handle_fasteoi_irq+0x158/0x1c8 [ 14.012564] [<....>] generic_handle_irq+0x30/0x44 [ 14.012568] [<....>] __handle_domain_irq+0x90/0xbc [ 14.012572] [<....>] gic_handle_irq+0xcc/0x18c Investigation using kgdb() found that the wait queue that was passed into wake_up() had been freed (it was filled with slub_debug poison). I analyzed and instrumented the code and reproduced. My current belief is that this is happening: 1. async_completed() is called (from IRQ). Moves "as" onto the completed list. 2. On another CPU, proc_reapurbnonblock_compat() calls async_getcompleted(). Blocks on spinlock. 3. async_completed() releases the lock; keeps running; gets blocked midway through wake_up(). 4. proc_reapurbnonblock_compat() => async_getcompleted() gets the lock; removes "as" from completed list and frees it. 5. usbdev_release() is called. Frees "ps". 6. async_completed() finally continues running wake_up(). ...but wake_up() has a pointer to the freed "ps". The instrumentation that led me to believe this was based on adding some trace_printk() calls in a select few functions and then using kdb's "ftdump" at crash time. The trace follows (NOTE: in the trace below I cheated a little bit and added a udelay(1000) in async_completed() after releasing the spinlock because I wanted it to trigger quicker): <...>-2104 0d.h2 13759034us!: async_completed at start: as=ffffffc0cc638200 mtpd-2055 3.... 13759356us : async_getcompleted before spin_lock_irqsave mtpd-2055 3d..1 13759362us : async_getcompleted after list_del_init: as=ffffffc0cc638200 mtpd-2055 3.... 13759371us+: proc_reapurbnonblock_compat: free_async(ffffffc0cc638200) mtpd-2055 3.... 13759422us+: async_getcompleted before spin_lock_irqsave mtpd-2055 3.... 13759479us : usbdev_release at start: ps=ffffffc0cc042080 mtpd-2055 3.... 13759487us : async_getcompleted before spin_lock_irqsave mtpd-2055 3.... 13759497us!: usbdev_release after kfree(ps): ps=ffffffc0cc042080 <...>-2104 0d.h2 13760294us : async_completed before wake_up(): as=ffffffc0cc638200 To fix this problem we can just move the wake_up() under the ps->lock. There should be no issues there that I'm aware of. Signed-off-by: Douglas Anderson Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman commit 7d68769591b6530056305b597f1de377f89878f8 Author: Sandeep Singh Date: Thu Aug 24 09:57:15 2017 +0530 usb:xhci:Fix regression when ATI chipsets detected commit e6b422b88b46353cf596e0db6dc0e39d50d90d6e upstream. The following commit cause a regression on ATI chipsets. 'commit e788787ef4f9 ("usb:xhci:Add quirk for Certain failing HP keyboard on reset after resume")' This causes pinfo->smbus_dev to be wrongly set to NULL on systems with the ATI chipset that this function checks for first. Added conditional check for AMD chipsets to avoid the overwriting pinfo->smbus_dev. Reported-by: Ben Hutchings Fixes: e788787ef4f9 ("usb:xhci:Add quirk for Certain failing HP keyboard on reset after resume") cc: Nehal Shah Signed-off-by: Sandeep Singh Signed-off-by: Shyam Sundar S K Signed-off-by: Greg Kroah-Hartman commit f638d313156065264fa8d6a8e67cabaa19c6443d Author: Dmitry Fleytman Date: Fri Aug 25 10:38:35 2017 +0300 usb: Add device quirk for Logitech HD Pro Webcam C920-C commit a1279ef74eeeb5f627f091c71d80dd7ac766c99d upstream. Commit e0429362ab15 ("usb: Add device quirk for Logitech HD Pro Webcams C920 and C930e") introduced quirk to workaround an issue with some Logitech webcams. Apparently model C920-C has the same issue so applying the same quirk as well. See aforementioned commit message for detailed explanation of the problem. Signed-off-by: Dmitry Fleytman Signed-off-by: Greg Kroah-Hartman commit f396fe577f513e19384266595037499cec9a59bd Author: Maciej S. Szmigiero Date: Tue Aug 29 21:50:03 2017 +0200 USB: serial: option: add support for D-Link DWM-157 C1 commit 169e86546f5712179709de23cd64bbb15f199fab upstream. This commit adds support (an ID, really) for D-Link DWM-157 hardware version C1 USB modem to option driver. According to manufacturer-provided Windows INF file the device has four serial ports: "D-Link HSPA+DataCard Diagnostics Interface" (interface 2; modem port), "D-Link HSPA+DataCard NMEA Device" (interface 3), "D-Link HSPA+DataCard Speech Port" (interface 4), "D-Link HSPA+DataCard Debug Port" (interface 5). usb-devices output: T: Bus=05 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2001 ProdID=7d0e Rev=03.00 S: Manufacturer=D-Link,Inc S: Product=D-Link DWM-157 C: #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=option I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Signed-off-by: Maciej S. Szmigiero Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit d70662e5a2e171af0dd7f0f210673ca9a7617e50 Author: Kai-Heng Feng Date: Wed Aug 16 10:53:20 2017 +0800 usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard commit de3af5bf259d7a0bfaac70441c8568ab5998d80c upstream. Corsair Strafe RGB keyboard has trouble to initialize: [ 1.679455] usb 3-6: new full-speed USB device number 4 using xhci_hcd [ 6.871136] usb 3-6: unable to read config index 0 descriptor/all [ 6.871138] usb 3-6: can't read configurations, error -110 [ 6.991019] usb 3-6: new full-speed USB device number 5 using xhci_hcd [ 12.246642] usb 3-6: unable to read config index 0 descriptor/all [ 12.246644] usb 3-6: can't read configurations, error -110 [ 12.366555] usb 3-6: new full-speed USB device number 6 using xhci_hcd [ 17.622145] usb 3-6: unable to read config index 0 descriptor/all [ 17.622147] usb 3-6: can't read configurations, error -110 [ 17.742093] usb 3-6: new full-speed USB device number 7 using xhci_hcd [ 22.997715] usb 3-6: unable to read config index 0 descriptor/all [ 22.997716] usb 3-6: can't read configurations, error -110 Although it may work after several times unpluging/pluging: [ 68.195240] usb 3-6: new full-speed USB device number 11 using xhci_hcd [ 68.337459] usb 3-6: New USB device found, idVendor=1b1c, idProduct=1b20 [ 68.337463] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 68.337466] usb 3-6: Product: Corsair STRAFE RGB Gaming Keyboard [ 68.337468] usb 3-6: Manufacturer: Corsair [ 68.337470] usb 3-6: SerialNumber: 0F013021AEB8046755A93ED3F5001941 Tried three quirks: USB_QUIRK_DELAY_INIT, USB_QUIRK_NO_LPM and USB_QUIRK_DEVICE_QUALIFIER, user confirmed that USB_QUIRK_DELAY_INIT alone can workaround this issue. Hence add the quirk for Corsair Strafe RGB. BugLink: https://bugs.launchpad.net/bugs/1678477 Signed-off-by: Kai-Heng Feng Signed-off-by: Greg Kroah-Hartman